Battery Charging; Docking Station - Bosch ADS 625X Quick Start Manual

Setup
1.

Battery charging.

Connect the tablet to AC power
using the USB power block and USB
C charging cord and fully charge the
battery.
When the tablet is turned on, the
level of battery charge is indicated
in the upper right corner of the
screen.
Note: ADS 625X is supplied with 2 USB C
power cables and 1 USB power block.
2 ft. cable
Battery Life Tips
The tablet is an Android based touch-
screen tablet. The battery life icon
shows charge level. The scan tool lets
you know how much battery life is
left by viewing the icon located at the
top right of the home screen. Like all
Android devices, there are tips to help
extend or maximize battery life.
When not actively being used, the
screen will timeout and the scan
tool display will power off, while
application remains running in
background. The user can set the
length of delay between the last
screen touch and automatic screen
timeout (dim and lock). From the
Home screen, touch the Android App
button - Settings - Display.
Select Screen timeout, then select the
length of time from the last screen touch
and automatic screen timeout.
To use again, press the power button
to wake the tool up. This will allow
maximum run time, while not limiting
© Bosch Automotive Service Solutions Inc
productivity.
When the tool is powered up, even if
it is not being actively used, Wi-Fi and
Bluetooth® radios as well as all other
necessary hardware are still being
powered. Battery life is comparable to
similar devices when in this state.
2.
6 ft. cable
ADS 625X for ADAS | Quick Start Guide | 5 | en-US

Docking station

The tablet, VCI, and cords should
be stored in the docking station
when not in use. The docking
station powers the VCI and provides
a slow, steady charge to the tablet
to preserve battery integrity.
Seat the tablet and VCI in the
docking station so that the docking
station connector at the bottom of
each device connects to the docking
station.
The docking station includes two
convenient USB ports to charge
accessories and other devices.
Notes:
• The docking station will not charge
the tablet if the tablet's USB port is in
use. Ensure no devices are connected
to the USB port on the tablet before
connecting to the docking station.
• For fastest charging, charge the
tablet using the USB power block and
USB C charging cord.
USB
ports
1699504264 | VER 01 | 06.2022