Sony Cyber-shot DSC-W580 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Digital Camera
  5. Cyber-shot DSC-W580
  6. Service manual

Sony Cyber-shot DSC-W580 Service Manual

Digital still camera
Hide thumbs Also See for Cyber-shot DSC-W580:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Ver. 1.3 2012.06
Internal memory
Internal memory
ON BOARD
ON BOARD
Revised-3
Replace the previously issued
SERVICE MANUAL 9-834-546-33
with this Manual.
SERVICE NOTE (Check the following note before the service.)
– ENGLISH –
1-1. Notes on Using Tripod Adapter
1-2. PRECAUTION ON REPLACING THE SY-274 BOARD
1-3. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
1-4. HOW TO WRITE DATA TO INTERNAL MEMORY
1-5. SELF-DIAGNOSIS FUNCTION
1-6. PROCESS AFTER FIXING FLASH ERROR
1-7. ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD
1-8. OPTICALSTEPPING MOTOR (F1430) REPLACING METHOD
1-9. DC MOTOR WORM (A) BLOCK ASSY REPLACING METHOD
1-10. TWO TUBE LIBRICATING BLOCK ASSY AND GROUP 1 FRAME REPLACING
METHOD
1-11. FINAL INSPECTION
The components identified by
Les composants identifiés par
mark 0 or dotted line with mark
une marque 0 sont critiques pour
0 are critical for safety.
la sécurité.
Replace only with part number
Ne les remplacer que par une piè-
specified.
ce portant le numéro spécifié.
DSC-W580_L2
9-834-546-34
DSC-W580
Canadian Model
AEP Model
Korea Model
Photo: Black
DIGITAL STILL CAMERA
Ver.
Date
2
LEVEL
1.0
2010.12
Official Release
1.1
2011.07
Revised-1
(A1 11-039)
1.2
2011.09
Revised-2
(A2 11-204)
UK Model
1.3
2012.06
Revised-3
E Model
(A3 12-142)
Sony Corporation
Revision History
History
Contents
—
• Revision of SERVICE NOTE.
Page
1-3
・ Correction of Model information table.
Page
2
・ Correction of REPAIR PARTS LIST.
Page 2-3, 2-4, 2-5,
2-7
983454634.pdf
S.M. Rev.
issued
—
Yes
Yes
Yes
2012F08-1
© 2012.06
Published by Sony Techno Create Corporation

Advertisement

Table of Contents
loading

Related Manuals for Sony Cyber-shot DSC-W580

Summary of Contents for Sony Cyber-shot DSC-W580

  • Page 1 0 sont critiques pour 0 are critical for safety. la sécurité. Replace only with part number Ne les remplacer que par une piè- specified. ce portant le numéro spécifié. 2012F08-1 DSC-W580_L2 © 2012.06 Sony Corporation 9-834-546-34 Published by Sony Techno Create Corporation...

  • Page 2: Specifications

    CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM- Speaker: Monaural (Recommended Exposure Index) set to Auto): NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT Exif Print: Compatible Approx. 0.2 m to 3.7 m (W) SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES...

  • Page 3: Service Note

    1. SERVICE NOTE – ENGLISH – 1-1. Notes on Using Tripod Adaptor 1-3. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY This model uses a Tripod Adaptor for adjustments. The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the internal memory.) When using a Tripod Adaptor, alter the USB, A/V cable for multi-use terminal as shown in the figure below.

  • Page 4: How To Write Data To Internal Memory

    – ENGLISH – 1-4. HOW TO WRITE DATA TO INTERNAL MEMORY 1-5. SELF-DIAGNOSIS FUNCTION 1-5-2. Self-diagnosis Display Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera. 1-5-1.

  • Page 5: Process After Fixing Flash Error

    Ver. 1.1 2011.07 The changed portions from Ver. 1.0 are shown in blue. – ENGLISH – 1-5-3. Self-diagnosis Code Table 1-6. PROCESS AFTER FIXING FLASH ERROR Self-diagnosis Code When “FLASH error” (Self-diagnosis Code E : 91 : 01) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash is changed automatically to disabling charge and flash setting.

  • Page 6: Ornamental Ring A Or Barrier Assy Replacing Method

    1-7. ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD 1-8. OPTICAL STEPPING MOTOR (F1430) REPLACING METHOD Removal Removal Turn on the power switch and extend the lens (WIDE end). Remove the screw. Detach the battery. Unsolder the four locations of the Optical Stepping Motor (F1430) to detach it. Apply alcohol to two gaps A of the Ornamental Ring A with tweezers or a fine-tipped stick as shown below.
  • Page 7 1-9. DC MOTOR WORM (A) BLOCK ASSY REPLACING METHOD Removal Installation Solder the two locations. Disengage the two claws and remove the FG Leaf Spring. Install the DC Motor Worm (A) Block Assy and secure it with two screws. Remove the two Sensors. *Tightening torque = 0.0xx ±...
  • Page 8 1-10. TWO TUBE LUBRICATING BLOCK ASSY AND GROUP 1 FRAME REPLACING METHOD Removal Remove the 3 Group spring and remove the 3 Group Frame Block Assy.. Disengage the two claws and remove the FG Leaf Spring. 3 Group Frame Remove the two Sensors. Block Assy Disengage the three claws and remove the FPC Retainer.
  • Page 9 Remove the Shield Ring (D) and remove the Frame Block Assy (1430A). Installation Frame Block Assy (1430A) Install the Group 1 Lens Frame Assy to the Group 1 Frame. Shield Ring (D) Turn the Group 1 Lens Frame Assy so that the round mark comes to the position shown in the figure below. Apply bond to the two points shown in the figure below.
  • Page 10 Put down the Shield Ring (AB) into the Cam Tube Block Assy. Align the end of the Iris Flexible Board with the number on the Tube Lubricating Block Assy, and then install the Frame Note: Put down the Shield Ring (AB) so that the pet side comes to the Eyepiece side. Block Assy (1430A) while inserting the three ledges of the Frame Block Assy (1430A) into the three ditches of the Tube Install the Tube Lubricating Block Assy while aligning the bayonet beside the number inside the Cam Tube Block Assy Lubricating Block Assy.
  • Page 11 Put down the Shield Ring (C) into the Rotary Tube Block Assy. Install the Main Assy (A) while inserting the seven convex parts of the Main Assy (A) into the seven ditch Note: Put down the Shield Ring (C) so that the pet side comes to the Eyepiece side. of the Rear Mirror Plate.

  • Page 12: Final Inspection

    1-11. FINAL INSPECTION Install the Gear B (Black), Gear A (White), Gear C (White), Gear D (Black), and Naruto Gear. Install the Rear Mirror Plate and secure it with four screws. *Tightening torque = 0.0xx ± 0.0xN • m (0.x ± 0.xkgf • cm) 1-11-1.
  • Page 13 1-11-2. Inspection When Cam Tube Block Assy Or Straight Tube Lubricated Assy Is Replaced Focus check 1 Preparation • Camera installed re-assemble lens.   • Chart (Printed PDF file at the same magnification) (Refer to <Reference>) • Tripod • Mirror (ex. CD) •...

  • Page 14: Repair Parts List

    2. REPAIR PARTS LIST IDENTIFYING PARTS (ENGLISH) The components identified by mark 0 NOTE: or dotted line with mark 0 are critical for Follow the disassembly in the numerical order given. safety. • -XX, -X mean standardized parts, so they may have some differences from the original Replace only with part number specified.

  • Page 15: Note For Repair

    NOTE FOR REPAIR Cut and remove the part of gilt Cut and remove the part of gilt which comes off at the point. which comes off at the point. • Make sure that the flat cable and flexible board are not cracked of bent at (Be careful or some (Be careful or some the terminal.
  • Page 16 Ver. 1.3 2012.06 The changed portions from Ver. 1.2 are shown in blue. 2-1. EXPLODED VIEWS DISASSEMBLY 2-1-1. REAR SECTION 1. Remove to numerical order ( ) in the left figure.  to #209/#210 X 5 Bottom View Left View Right View #209 #209 #210...
  • Page 17 Ver. 1.3 2012.06 DISASSEMBLY 2-1-2. FRONT/TOP SECTION 1. Remove to numerical order ( ) in the left figure.  to (1) Hounetsu Sheet (740) #209 #209/#210 X 1 #209 X 1 Bottom View Back View #209 #209 #210 (6) Insulating Sheet (740) DISCHARGING OF THE CHARGING CAPACITOR BT900 (7-1) Tape (N5) →...

  • Page 18: Main Section

    Ver. 1.3 2012.06 The changed portions from Ver. 1.2 are shown in blue. DISASSEMBLY 2-1-3. MAIN SECTION 1. Remove to numerical order ( ) in the left figure.  to 2. The meaning of the sign in left figure is as follows. Be careful when it removes. ◇-X: Solder (1) MC Reinforesment Sheet (740) (2) SP Sheet Metal (740)

  • Page 19: Lens Block Section

    DISASSEMBLY 2-1-4. LENS BLOCK SECTION 1. The meaning of the sign in left figure is as follows. Be careful when it removes. ◇-X: Solder ns : not supplied Screw (including CD-805 complete board, #30: M1.2 X 3.5 (Tapping) #176: M1.2 X 2.0 IC002 (CCD imager))(Note 3, 4) (White) (Silver)
  • Page 20 Ver. 1.3 2012.06 The changed portions from Ver. 1.2 are shown in blue. Checking supplied accessories. Note : This item is supplied with the unit as an accessory, but is not prepared as a service part. Battery charger Rechargeable battery pack (NP-BN1) Conversion (2P) Adaptor (BC-CSN/BC-CSNB) (Note)
  • Page 21 3. ASSEMBLY Assembly-1: Installation Methode of Battery Terminal Board Assembly-2: Insulating Sheet (740) Putting Position Assembly-4: Precaution During of Cabinet (Rear) Assy Assembly-5: Attaching Method of LCD Cushion (620), Installation. LCD Window (620) Insulating Sheet (740) Remove the battery terminal board by Align the slide switch at the camera mode, when install Apply LCD cushion (620).

Table of Contents