Replacing The Filter; Resetting The Filter - Bosch Air 4000 Manual

Cleaning and maintenance
▶ Clean the surface of the filter with a vacuum cleaner.
▶ Insert the filter back into the appliance.
▶ Push and rotate the bottom cover.
▶ Insert the appliance back into vertical position.
▶ Insert the plug of the air purifier in the power socket.
▶ Touch the power button
▶ Touch and hold the filter status check/reset button
filter life time.
The screen displays a message "Filter status 100%".
▶ Wash your hands after cleaning the filter.
1.
3.
2.
Fig. 22 Removing and cleaning the filter
5.4

Replacing the filter

CAUTION
Wear a mask and gloves when cleaning the filter surface and/or replacing
the filter.
18
to switch on the appliance.
to reset the
4.
0010043284-001
The air purifier is equipped with a filter replacement indicator
make sure that the air purification filter is in optimal condition when the
air purifier is operating.
If the filter is not replaced in time, the air purifier will stop operating to
protect the air quality in the room. Replace the filter as soon as possible.
NOTICE
The filter is not washable or reusable.
CAUTION
Always turn off the air purifier and unplug it from the electrical outlet
before replacing the filter.
▶ Switch off the air purifier and unplug it from the power socket.
▶ Lay the appliance horizontally in a steady surface.
▶ Rotate and pull the bottom cover and remove it from the appliance.
▶ Pull the filter from the appliance.
▶ Remove the plastic cover of the new filter [ Figure Fig. 18 "Pulling
the bottom cover and removing the plastic cover"].
▶ Insert the new filter into the appliance.
▶ Push and rotate the bottom cover.
▶ Insert the appliance back into vertical position.
▶ Insert the plug of the air purifier in the power socket.
▶ Touch the power button
▶ Touch and hold the filter status check/reset button
filter lifetime counter.
▶ Wash your hands after replacing the filter.
Note:
Do not smell the filter as it has collected pollutants from the air.
5.5

Resetting the filter

When the filter lifetime counter reaches 0%, the filter must be replaced.
The counter goes back to 100% after pressing the filter button
Fig. 23 Filter lifetime reaching 0%
The filter may be replaced before the filter lifetime reaches 0%. The filter
lifetime counter needs to be reset manually after its replacement:
▶ Touch the power button
from the power socket.
▶ Insert the plug in the power socket.
to switch on the appliance.
to reset the
0010043374-001
to turn off the appliance and unplug it
Air 4000 – 6721848798 (2022/02)
to
.