Page 1
ET-LAC300 Model No. ET-LAC200 ET-LAC300 ET-LAC200 Thank you for purchasing this Panasonic product. ■ Please read these operating instructions and the projector operating in- structions carefully, and then use this product correctly. ■ Before using this product, be sure to read [Read this first!] (Page 2). ■ Please save this manual for future use. TQBH0293-1...
Read this first! Always follow these precautions WARNING: Do not disassemble the lamp unit. If the lamp breaks, it could cause injury. Lamp replacement The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will result. • The lamp can easily explode if struck against hard objects or dropped.
Page 3
Accessories The following accessories (2 x filter/bagged) are included. Air filter (rear) x 1 Air filter (side) x 1 Attention Dispose of the packaging materials properly after unpacking the product. Replacing the Lamp unit & Air filters Notes on replacing the lamp unit • The light source lamp is a glass component. If it is hit on a hard object or dropped, breakage may occur.
Page 4
Replacement prcedure 1) Turn off the Power and then unplug the AC power cord. Wait at least 1 hour and make sure the lamp unit and surroundings are cool. 2) Use a Phillips screwdriver to loosen the Lamp cover screws (2 screws) and open the lamp cover.
Page 5
8) Install the new air filters (Replacement air filters). To install the air filters, reverse the previous steps until you hear a "click" sound. 9) Connect the power plug to the power outlet and then turn on the Power. Press <MENU> button to display main menu. select [Options] 10) Press ▲▼ to and then press ►. 11) Press ▲▼...