Page 2
Important Notice Important Notice To ensure proper use, please read through this CAUTIONS About GPS manual before using this product. It is especially To care for the unit important that you read and observe WARNINGS When you turn on this unit for the first time, you •...
Page 3
JVCKENWOOD ezennel kijelenti, hogy a Par la présente, JVCKENWOOD déclare que Por la presente, JVCKENWOOD declara que el equipo „DMX7722DABS“ rádióberendezés megfelel a 2014/53/ l’équipement radio « DMX7722DABS » est conforme à de radio “DMX7722DABS” cumple la Directiva 2014/53/ EU irányelvnek. la directive 2014/53/UE.
Page 4
Slovensko διαδίκτυο: https://www.kenwood.com/euukdoc/ S tem JVCKENWOOD izjavlja, da je radijska oprema https://www.kenwood.com/euukdoc/ » DMX7722DABS « v skladu z Direktivo 2014/53/EU. HRVATSKI / SRPSKI JEZIK Celotno besedilo direktive EU o skladnosti je dostopno Eesti JVCKENWOOD ovim izjavljuje da je radio oprema na tem spletnem naslovu: Käesolevaga JVCKENWOOD kinnitab, et...
Page 5
JVCKENWOOD настоящим заявляет, что touch panel. Hereby, JVCKENWOOD declares that the radio радиооборудование «DMX7722DABS» соответствует equipment “DMX7722DABS” is in compliance with the Indication language: English indications are used Директиве 2014/53/EU. for the purpose of explanation. You can select the relevant statutory requirements.
Component Names and Basic Operations Component Names and Basic Operations 6 VOICE button: (Press) Activates the voice Touching the operation keys performs the following Monitor panel actions: recognition. – When no device for Apple CarPlay, Android 1 Displays the control screen of current source. Auto, and Bluetooth phone is connected, 2 Displays the source/option selection screen.
Component Names and Basic Operations Component Names and Basic Operations <Demonstration> (page 41) Putting the unit in standby Adjusting the volume • ON (Initial): Activates the display demonstration. You can adjust the volume (00 to 40) • OFF: Deactivates the display demonstration. Display the source/option selection by pressing VOL to increase and...
Component Names and Basic Operations Component Names and Basic Operations Set or adjust the date and clock items. Date and clock settings <Clock Adjust> Touch [ ] (1) to adjust the date (year/month/ <Clock>* date), and adjust the hour/minute. Touch [SET] (2) Display the Home screen.
In-Car Connections In-Car Connections To operate your smartphone hands-free, and Apps of • For USB Mirroring (page 17), connect the Android USB connection the smartphone (Apple CarPlay, Android Auto, and device both with USB and Bluetooth. USB Mirroring), the following connections are required. •...
In-Car Connections In-Car Connections Pairing a Bluetooth device using SSP • Once the connection is established, it is registered Bluetooth® connection (for Bluetooth 2.1) in the unit until you initialise the Bluetooth settings (page 43) or the unit itself (page 44). Up to five Information for using Bluetooth devices Display the Home screen.
Page 12
In-Car Connections In-Car Connections Once pairing is completed... Pairing a Bluetooth device using a PIN code Search for the unit “DMX7722DABS” from • For iPhone compatible with wireless Apple (for Bluetooth 2.0) your Bluetooth device. CarPlay Display the Home screen.
Page 13
• Touch [ < ] scrolls the text if not all of the text is From the Home screen (page 3), touch as shown. Search for the unit “DMX7722DABS” from follows: • For list/setting screen operations, see also your Bluetooth device.
Page 14
In-Car Connections In-Car Connections About the profile icons Adding the registered devices Select the profile for the selected device. • Available profile for the listed devices are in white. Display the <Device List> screen. When the profile is active for the devices, it becomes Please Select a profile From the Home screen (page 3), touch as blue.
Shows the device name of this unit to be shown on Display the <Device Remove> screen. change and confirm the following item settings. DMX7722DABS On the <Device List> screen: the Bluetooth device — • For list/setting screen operations, see also page 14.
Various Screens and Operations Various Screens and Operations In-Car Connections In-Car Connections You can display or change to other screens at any time Touch [Enter] to display the selected item <Wi-Fi Setup> to show information, change the playback source, Shows the device name, device address and screen.
Various Screens and Operations Various Screens and Operations 2 Source/option keys 3 Phone control screen indicator Source control screen • Touch to display the phone control screen [Apple CarPlay] Displays the home screen of Apple You can operate the playback source using the source (page 31).
Various Screens and Operations Various Screens and Operations 4 (Not displayed for folder list) Enters alphabet search To close the pop-up function menu: Touch the Using the pop-up function menu screen anywhere other than the pop-up function to list the items in alphabetical order.*2 You can easily access the frequently used features.
Apps Apps You can use the Apps installed in your iPhone and Compatible iPhone devices To change the source from the others You can use Apple CarPlay with the following iPhone Android device by using “Apple CarPlay,” “Android Touch [Apple CarPlay] on the source/option selection models.
Apps Apps Using Siri Apple CarPlay screen operation Using the Apps of an Android™ device — You can activate Siri while the Apple CarPlay screen is You can use the Apps of the connected iPhone. Android Auto™ displayed. The items displayed and the language used on the screen differ among the connected devices.
Radio Mirroring SETUP Android device. • When you use “Mirroring OA for KENWOOD” for Using voice guidance of the Android device the first time, the terms of service are displayed. It is The Android Auto screen is displayed. You can activate the voice guidance of the Android necessary to agree to the terms of service to use this device while the Android Auto screen is displayed.
• When no USB device is connected: Preparation: Connect a USB device to the USB terminal. • Unlock your Android device beforehand. Playing The playback source changes to [USB] and playback • Make sure that the KENWOOD’s Mirroring OA App starts. Apple Android Bluetooth Camera is installed.
1 Displays/hides the following operation keys 8 Playlist (PLIST) indicator: displayed when Category Video playback operations List/Link Search is selected. Selects a folder. 9 Current playback file information While watching a video, you can use the following (file type/folder no./file no.) features.
Video menu control [ Picture Displays the <Screen Adjustment> Search operations Adjust] screen. Menu Control You can search files to play. 1 Touch [DIM ON] or [DIM OFF] to turn on or off the dimmer. Display the search method selection 2 Touch [+]/[–] to adjust the other screen.
<Category Search> <Link Search> Settings for USB playback This is only used for audio files. This is only used for audio files. • To change the file type, see page 19. • To change the file type, see page 19. Display the <USB Mode>...
Digital Radio (DAB) Digital Radio (DAB) 7 Displays/hides the following operation keys DAB (Digital Audio Broadcasting) is one of the digital Playback information on the source control radio broadcasting systems available today. It can screen [PTY]* (For RDS features) deliver digital quality sound without any annoying Enters PTY search mode.
Page 27
Digital Radio (DAB) Digital Radio (DAB) 8 Indicators Selecting a service on the list [TI] (For RDS features) • TI: Lights up in white when receiving the traffic Activates TI Standby Reception You can obtain information on service or select a information, and lights in orange when TI mode.
Digital Radio (DAB) Digital Radio (DAB) Select a preset service. <Priority> Presetting services in the memory • ON (Initial): If the same service is provided by Digital Radio You can preset five services for each band. Digital Radio during Radio Data System reception, the unit automatically switches to Digital Radio.
Radio Radio Digital Radio (DAB) Digital Radio (DAB) 1 Selects the band (AM/FM1/FM2/FM3) <Antenna Power> Listening to the radio • Each time you touch [FM], FM band changes in • ON (Initial): Supplies power to the DAB aerial. order of FM1, FM2, and FM3. •...
Radio Radio • RDS: Indicates the status of the Radio Data [TI] (For FM RDS stations) ] Searches for a station. System station reception when the Network- Activates TI Standby Reception mode. • The search method differs Tracking Reception is activated (Page 27). •...
Radio Radio Manual presetting Select a preset station. <AF Regional> When driving in an area where FM reception is not Select the band, and then tune in to a Radio sufficient enough, this unit automatically tunes in station you want to preset. AM FM1 to another FM Radio Data System station of the On the source control screen:...
Other External Components Other External Components Radio Radio Video menu control <Local> AV-IN devices You can display the video menu control while • ON: Tunes in only to FM stations with sufficient watching the video from the external components. Connecting external components signal strength.
Other External Components Other External Components To display parking guide line Connecting an around view monitor Cameras (Only for the rear view camera) camera (commercially available) Touch the area shown below, or set <Parking Install the cameras (separately purchased) in the See page 51.
Bluetooth® Device Bluetooth® Device You can use the mobile phone and portable audio During a call... Bluetooth mobile phone player connected through Bluetooth. • While using Apple CarPlay, Android Auto, or USB When a call comes in, this unit automatically enters Phone Name 1 Phone Name 2 Name...
Page 35
Bluetooth® Device Bluetooth® Device 1 From the call history* (missed calls/received Making a call To display other phone numbers in the same calls/dialed calls) contact Display the phone control screen. 2 From the phone book* You can store up to ten phone numbers per From the Home screen (page 3), touch as 3 From the preset list (page 32) contact.
Bluetooth® Device Bluetooth® Device Presetting phone numbers Select call history or phone book ( ), and Bluetooth mobile phone settings then select a contact ( ) to preset. You can preset up to five phone numbers. You can change various settings for using Bluetooth Display the phone control screen.
• Front Only: Front speakers only. shown. • All (Initial): All speakers. 4 Signal strength and battery level (Appears only when the information is acquired from the device.) 5 Device name • Touching the device name shows the <KENWOOD Music Mix> screen (page 34). ENGLISH...
Page 38
Meaning Album Songs Device used currently for <Bluetooth Genre Audio>. Display the device list for KENWOOD • Touch to display the <Device List> Music Mix. screen (page 9). On the source control screen: Bluetooth Audio Devices ready for KENWOOD Music Mix.
Settings Settings <Equalizer> Store your own sound adjustments Audio settings The following adjustments are memorised for each Select one of the User mode (User1 – source until you adjust the sound again. Display the <Audio> screen. User4) to store your adjustment into. On the source/option selection screen (page 12): Select a band ( ), adjust the level (...
Page 40
Settings Settings <Stage EQ> <Sound Effect> <Speaker/X’over> Moves the centre of the sound to the lower or higher Adjust the sound effect. Preparation: point. Select the height. Before making the adjustment for <Speaker/X'over>, <Loudness> • OFF (Initial)/Low/Middle/High select the appropriate crossover network mode Adjusts loudness.
Page 41
Settings Settings Select the speaker type ( ), select the <Gain>/<TW Gain> Now, you can adjust the <Speaker/X'over> size of the selected speaker ( ), and then Adjusts the output volume of respective speaker. settings. display the <X’over> screen ( <HPF FREQ>/<LPF FREQ>...
Page 42
Settings Settings <Listening Position> <Front Focus> Touch [Gain] (1), and then adjust the This setting is used for both 2-way speaker system and When you select 2-way speaker system, you can use sound level of each speaker (2). 3-way speaker system. this setting, enabling you to focus the imaginary sound localization for the seat you select.
Settings Settings Touch [Distance] (1), and then adjust the Touch [Gain] (1), and then adjust the Display settings following parameters (2). sound level of each speaker (2). 1 Display the <Display> screen. Front Focus Adjust Front Focus Adjust Distance Gain On the source/option selection screen (page 12): Tweeter 0.0 dB...
Page 44
Settings Settings • You can also adjust the illumination colour yourself. <User Customize> While playing Slide Show, display the Touch the white-coloured box, and then [Edit] to <User Customize> screen. You can change the following items. display the illumination colour adjustment screen, 1 Press the HOME button on the monitor panel.
Settings Settings <Demonstration> <Screen Adjustment> Input settings • ON (Initial): Activates the display demonstration. Adjust the following items related to the screen. Display the <Input> screen. • OFF: Deactivates the display demonstration. Select [DIM ON] (dimmer on) or [DIM OFF] (dimmer On the source/option selection screen (page 12): off), then change the following settings: <Scroll>...
Settings Settings Make sure that A and B are horizontally parallel, and <Rear Camera> System settings that C and D are the same length. Configure the rear view camera settings. Display the <System> screen. • Touch and hold [Initialise ] for 2 seconds to set all <Rear Camera Interruption>...
Page 47
Set your driver’s seat position of your car — [LEFT] <Device Name> (Initial) or [RIGHT]. Shows the device name of this unit—DMX7722DABS. Select the time zone for your residential area. For This setting changes the sidebar/button position of details, see page 5.
Page 48
Settings Settings <Android Mode Select> <SET-UP Memory> <Steering Remote Controller> Select your Android usage — either [Android Auto] Memorise, recall, or clear the settings you have made. Assign the functions to the keys on the remote (Initial) or [Mirroring for Android]. •...
Page 49
Touch [Done] to finish the procedure. Updates the Digital Audio Broadcast (DAB) module • To obtain the update file, visit <https://www.kenwood.com/cs/ce/>. application. • The unit can register all of the buttons’ functions at • Do not disconnect the USB device while updating.
Remote Controller Remote Controller To use the remote controller, purchase optional CAUTION Preparation remote controller, KCA-RCDV340. • Do not leave the remote controller in hot places such • When using the remote controller, refer also to Battery installation as on the dashboard. the instruction manual supplied with the remote Use two “AAA”/“R03”-size •...
Remote Controller Remote Controller ENTER Not used for this unit. 0 – 9 • Specifies preset number for Basic operations for KCA-RCDV340 Radio. (1-5) DVDSETUP Not used for this unit. • Specifies preset service for DAB. V.SEL RETURN Not used for this unit. FNC/PBC MODE (1-5)
Installation and Connection Installation and Connection • If your car’s ignition does not have an ACC position, Before installation This section is for the professional installer. connect the ignition wires to a power source that For safety’s sake, leave wiring and mounting to can be turned on and off with the ignition key.
Installation and Connection Installation and Connection Parts list for installation Installation procedure Installing the unit Note: This parts list does not include all the package Remove the key from the ignition and Installing the unit using the mounting contents. · disconnect the battery.
Installation and Connection Installation and Connection Insert the extraction keys ( ) deeply into Removing the unit Installing the supplied GPS aerial the slots on each side. GPS aerial is installed inside of the car. It should be Remove the trim plate ( ) by inserting the installed as horizontally as possible to allow easy two extraction keys (...
Contact your KENWOOD dealer for details. 6 Around View Monitor terminal (AVM) • Depending on the type of car, reception of the GPS satellite signals might not be possible with an inside •...
Installation and Connection Installation and Connection Wiring connection *1 If no connections are made, do not let the cable come out from the tab. *2 For 3-way speaker system connection, see page 36 π Connect the aerial cord to the aerial terminal USB terminal (1 m) ¥...
References References Playable files • This unit can show or display the following Tag: Maintenance • This unit can play back the following files with MP3: ID3 Tag (version 1.0/1.1/2.2/2.3/2.4) following codec and extension code: WMA Tag Cleaning the unit –...
Page 58
References References Video file conditions • Other playable conditions: About Apple CarPlay – Video file size: Less than 2 GB • Streams that conform to: • The following iPhone devices can be used. – MPEG1/MPEG2: – MPEG1/MPEG2: File format: SP@LL, SP@ML, MP@ Made for Audio: MP1, MP2, MP3, AAC-LC, AC3, LPCM LL, MP@ML, MP@H-14, MP@HL, HP@LL, HP@ML,...
→ Turn on the screen (page 4). → Turn off, then turn on this unit. compatibility between this unit, “Mirroring OA for KENWOOD App” and your Android device. The unit does not work at all. This unit does not pair with the Bluetooth device.
Page 60
<Device List> screen. “Initialise Error” appears. <Android Mode Select> (page 44). → Check KENWOOD's Mirroring OA App is activated → The unit has failed to initialise the Bluetooth → Check the version of the connected Android device on Android device.
Page 61
Troubleshooting Troubleshooting Digital Radio (DAB) Cameras “No File” appears. Cannot receive an ensemble. No picture appears on the screen. → The loaded USB does not contains any file of the → Your area is not covered by the ensemble. → Connect the camera correctly. selected type (audio/video/photo).
Specifications Specifications Troubleshooting Troubleshooting “Dial Error” appears. Monitor section Frequency Response 192 kHz Sampling: → Dialing has failed. Try the operation again. 20 Hz to 20 000 Hz Picture Size (W × H) 6.75 inches (diagonal) wide 96 kHz Sampling: 151.8 mm ×...
Page 63
Specifications Specifications Wi-Fi section DSP section Profile HFP (Hands Free Profile) V1.8 SPP (Serial Port Profile) IEEE Standard 802.11 a/b/g/n/ac Equalizer 13 Band A2DP (Advanced Audio Band Frequency (Hz): Frequency Range Dual Band (2.4 GHz/5 GHz) Distribution Profile) V1.3.2 62.5/100/160/250/400/630/ Channels Auto (1 –...
Page 64
Specifications Specifications FM radio section Tweeter HPF: Frequency (Hz): External Audio Max 2 V/25 kΩ 1k/1.6k/2.5k/4k/5k/6.3k/8k/ Input Level (mini Frequency Range 87.5 MHz to 108 MHz 10k/12.5k jack) (Frequency Step) (50 kHz) Slope (dB/Oct.): Video Input Level 1 Vp-p/75 Ω Usable Sensitivity 6.2 dBf (0.56 μV/75 Ω) −6/−12...
Trademarks and Licences Trademarks and Licences • Windows Media is a registered trademark or • Wi-Fi® is a registered trademark of Wi-Fi Alliance®. • THIS PRODUCT IS LICENSED UNDER THE MPEG- trademark of Microsoft Corporation in the United • The Wi-Fi CERTIFIED™ Logo is a registered trademark 4 VISUAL PATENT PORTFOLIO LICENSE FOR THE States and/or other countries.
Trademarks and Licences Trademarks and Licences Because licenses to use software components This agreement is deemed to have taken effect when Important Notice on Software distributed under the GPL/LGPL are offered to the the customer (hereinafter called “User”) has used a customers for free of charge, no warranty is granted to product implementation of Licensed Software.
Page 67
Trademarks and Licences Trademarks and Licences Article 3 (Terms of License) Article 6 (Responsibility for Third Parties) Article 10 (Copyright Protection) 1. In assigning this product, User may not retain If disputes over the infringement of third parties’ 1. Copyrights and all other intellectual property the original copy of the embedded Licensed intellectual property rights, such as copyrights and rights relating to Licensed Software shall reside...
Page 68
For updated information (the latest Instruction Manual, system updates, new functions, etc.), please visit the following website: <https://www.kenwood.com/cs/ce/>...