Programming The Controller – 4
Figure 22
When we return to the Stations screen, the program name, run
time and flow rate (from the Program screen) and the assigned
Flow Zone (from the Satellites screen) will be entered.
The normal station run time (N - Time), flow rate and Flow
Zone number assignment can now be modified as desired.
For example, we have decided to change the run time for
Station 3 from 17 minutes to 15 minutes, as shown in Figure 23.
This was done by selecting the desired box under the N-TIME
column and using the pop-up keypad to enter the time.
Figure 23
25
RELEASED Version
©Toro 2006-2006