Table of Contents
Advertisement
CF Port
To enhance the QuickPanel View‟s capabilities with additional flash memory,
the unit is equipped with a CF (Compact Flash) Type 2 port on its side.
A CF card is inserted in this port with the card‟s front facing the back of the unit.
(The narrow side slot on the card should be toward the bottom.)
Note: For full protection from electrostatic discharge, peel off the paper label
on the side of the CF card facing the bezel to allow contact between
the card and the internal frame ground contacts on the CF connector.
The card should slide in easily. To avoid damage, do not force it.
The Copy Project to Flash Card utility, described in chapter 2 lets you transfer
Proficy Machine Edition projects between QuickPanel View units using
CF Cards.
The CF port in the QuickPanel View supports 3.3V CF cards.
GFK-2306E
Chapter 4 Detailed Operation
4
4-21
Advertisement
Table of Contents
