Update Configuration File - Bosch XDK110 Connection Manual

Connect XDK110 device to your Azure IoT services
4.4.4 Publish device template
4.4.4.1. Select the Publish button
4.4.4.2. On the Publish this device template to the application dialog, select Publish.
4.4.4.3. After you publish a device template, it will be visible on the Devices page.

4.5 Update configuration file

In order for you to configure your device, you can make use of config.json file. Please find the example file from the
workbench at location 'AzurePlugAndPlay/resources/config/config.json'. You can play around with different options are
per your requirement. Let's discuss minimum changes that are required to connect the device and visualize data is
discussed here.
4.5.1. Update deviceInfo section
4.5.1.1. Update the value of deviceId with the name used for creating the X.509 device certificate. As example we took
'myXdk110' at step 2.5.
4.5.1.2. Update the the value of idScope with the ID Scope of the created IoT Central Application. Please find this detail
within the IoT Central Application at 'Administration' → 'Device connection' → 'ID Scope'
Please remember to keep the details within double quotes.
Data subject not change without notice | Printed in Germany | December 2020
This is optional field, without this the device will consider the WLAN MAC ID as the device id.
8 | 16
BCDS