Advertisement
Additional Notices (cont.)
Operator requirements
Characteristics of personnel trained for normal machine use.
The Customer must make sure the personnel for normal machine use are adequately trained and skilled in their
duties, as well as ensuring their own safety and that of other persons. The Customer must make sure his personnel
have understood the instructions received and in particular those regarding work hygiene and safety in use of
the machine.
Characteristics of personnel enabled to operate on the machine
The Customer is responsible for ensuring that persons assigned to the various duties:
• read and understand the manual;
• receive adequate training and instruction for their duties in order to perform them safely;
• receive specific training for correct machine use.
Operator qualified for normal machine use
He must have at least:
• knowledge of the technology and specific experience in operating the machine;
• adequate general basic education and technical knowledge for reading and understanding the contents of the
manual;
• including correct interpretation of the drawings, signs and pictograms;
• sufficient technical knowledge for safely performing his duties as specified in the manual;
• knowledge of the regulations on work hygiene and safety.
In case of a significant anomaly (e.g. short circuits, wires coming out of the terminal block, motor breakdowns,
worn electrical cable sheathing, etc.) the operator for normal machine use must:
• immediately unplug unit.
WARNING: ELECTRIC SHOCK HAZARD!
must only be carried out by a specialised technician or the After- Sales Service, provided with suitable tools and
ancillary means.
Put the machine in safe conditions before starting any maintenance operation.
Respect the requirements for the various routine and extraordinary maintenance operations. Non-compliance
with the instructions can create risks for personnel.
After carrying out maintenance make sure the machine is able to work safely and, in particular, that the
protection and safety devices are efficient.
Scrapping
When scrapping the machine, the "CE" marking, this manual and other documents concerning the appliance
must be destroyed.
800 Series Coffee Grinders
Machine maintenance, checking and overhaul operations
Electrolux
5
Advertisement
