Change Log - GE MDS TD220MAX Manual

TD220MAX_manual_v11.doc

7 Change Log

Version Date
1 1/17/2011
2 1/20/2011
3 2/15/2011
4 2/24/2011
5 2/28/2011
6 3/7/2011
7 6/6/2011
8 5/15/2012
9 7/30/2014
10 7/30/2014
11 7/31/2014
05-6906A01
Author Changes
L. Lowe 
Initial release for TD220X
T. Mayo 
Updated FCC notices

Updated power supply current requirements
T. Mayo 
Clarified 1PPS input levels.
T. Mayo 
Updated screenshots for the Poller application.

Added a section on field surveying using the Poller
application.
T. Mayo 
Removed references to Parm Poller, the old name for
TD220X Poller.
K. Tuttle 
Added the "Upgrading the Firmware" section
T. Mayo 
Adjusted parts of the bench and field test sections to
make configuration more foolproof.
T. Mayo 
Added information on COM1 port defaults.

Changed links to point to Support Central.
T. Mayo 
Added information for DB-25 aggregated alarm output
(pin 8).

Added information for fallback timing sources.

Corrected frequency ranges for Radio Configuration
menu.

Need to add information on duty cycle setup.

Made corrections based on agency compliance
feedback.
T. Mayo 
Added part number.
T. Mayo 
Clarified duty cycle information.
Page 49 of 49 7/31/2014