Kenwood Sovereign Entre Install Manual page 13

How Do I Connect to My Kenwood Sovereign DVD or CD Changer?, continued
Entré can control the following Kenwood DVD and CD changers:
• DVD: DV-5900M, DV-5050M
• CD: CD-425M, CD-4700M
Do not plug in Entré or devices to AC power until you have connected all your
devices.
Connect the included RS-232D cable from the DVD or CD changer's RS-
232D jack to Entré's RS 232C to CD/DVD Changer jack as shown.
The RS-232C cable included with Entré has female
connectors at both ends. If you are substituting a commercially
available RS-232C cable, make sure that it has female
connectors on both ends.
For all other connections between the DVD/CD changer and receiver/
amplifier, refer to the instruction manuals for those components.
If you are using Entré with a Kenwood Sovereign DVD
changer and a non-Kenwood Sovereign receiver, follow the
connection instructions on pages 8–9.
If you are daisy-chaining more than one Kenwood Sovereign
DVD changer, Entré will only control the changer in the chain
designated 'Main', not those designated 'Sub 1' and 'Sub 2'.
How to Connect and Set Up Your Entré Entertainment Hub
How Do I Connect to My Kenwood Sovereign DVD or CD Changer?, continued
7