Kenwood VBP50 Instructions Manual page 3

safety
• Read these instructions carefully and retain
for future reference.
• Remove all packaging and any labels.
• If the cord is damaged it must, for safety
reasons, be replaced by KENWOOD or an
authorised KENWOOD repairer.
• Always make sure that the voltage of the
mains electricity supply is the same as that
indicated on the rating plate of the appliance
and that the system is compatible with the
appliance power.
• The appliance may only be used for its
intended purpose, which is for vacuuming
dust from surfaces within the home. Any
other use is to be considered improper
and therefore, dangerous. The manufactur-
er may not be held liable for any damages
caused by improper, incorrect or unreason-
able use.
• Do not use to vacuum hot ash, large pieces
of glass, rubble, sharp or pointed items or
liquids.
• To prevent dangerous overheating, always
unwind the power cord fully and unplug the
appliance from the mains when the appli-
ance is not in use.
• Only plug the appliance into an AC socket.
• Never use the appliance without a bag or
motor filter or if the bag or filter are broken or
damaged.
• Never use the appliance on wet surfaces.
• Never suck up liquids.
• NEVER PLACE THE APPLIANCE IN WATER
OR OTHER LIQUIDS.
English
3