Table of Contents
Advertisement
SKY
TV/AV
1
2
3
abc
def
4
5
6
ghi
jkl
mno
7
8
9
tuv
0
26
Getting started
This section gives you the information you need to start watching
digital satellite broadcast.
Note :
1. Before starting, make sure your Sky Viewing Card is inserted
the right way up in the slot marked SKY VIEWING CARD on
the front panel. If you do not have a Sky Viewing Card, call
your broadcaster's helpdesk. For your broadcaster's helpdesk
number, select the TELEPHONE NUMBERS option from the
SERVICES screen.
2. So that you can watch all the channels and services you want,
you must leave your Sky Viewing Card in your set at all times.
Switch on/off
1. Press the SKY button to select the satellite mode.
PR/CH
2. Press the TV/AV button to revert to TV and AV modes.
Note : When you first switch this TV on (and whenever you switch it off
and then on at the main power switch) there will be a delay of up to one
minute while the internal digital satellite receiver initializes itself. If the
TV is in SKY mode the following message will be displayed on the
screen : Initializing... Please wait. This is normal and not a fault.
Changing programmes
You can select a programme with the PR/CH +/- or NUMBER
buttons. Each time you change programme, the Search and Scan
banner appears on the screen.
BACK UP
The banner will disappear automatically after a few seconds, or
you can press the BACK UP button to remove it immediately. For
more details about this banner refer to the Using your 'SkyGuide'
section.
Advertisement
Table of Contents
