JVC JX-S333-J Instructions Manual page 8

Connectors Controls, and Indicators (Remote Control Unit)
Remote Control Unit
1
POWER button
Press to turn the power ON or OFF (in standby mode).
2
SOURCE SELECT buttons
Press to select an input component.
3
DUBBING LOCK button
(MONITOR SELECT)
Press to fix the output signals through the OUTPUT 1 and
2 connectors. This can prevent accidental or erroneous
operation during dubbing. The DUBBING LOCK indicator
on the main unit lights in red when DUBBING LOCK is
activated.
• When one of the SOURCE SELECT buttons is pressed
while DUBBING LOCK is activated, only the video/audio
output through the MONITOR OUT is changed, but the
video/audio output through the OUTPUT 1 and 2
connectors remains unchanged so that you can keep
dubbing the signals through these connectors.
8
-EN
1
SOURCE
SELECT
1
2
2
3
4
DUBBING LOCK
(MONITOR SELECT)
3
☞
( p. 11, 13, 15, 17)
☞
( p. 15, 17)
POWER
LINK
4
☞
4
LINK button
( p. 20)
Press to turn the LINK function ON or OFF.
When this function is ON, the LINK indicator on the main
unit lights in red. The unit power automatically turns on or
off by detecting the incoming S-video signals from the
playback components.
This function is only available with the
playback components equipped with S-
VIDEO output connectors.