164
Removal
Detach RU Mounting Adapter Plate
7.4
Detach RU Mounting Adapter Plate
This procedure describes how to detach the mounting adapter plate from the RU.
Prerequisites:
■ Loctite LB 8012 or equivalent lubricant applied to all bolts
■ 17 mm socket
■ 5/8 in. wrench
■ Power tools (optional)
■ Metric and SAE toolkit
Step 1
Unscrew the two M10 x 30 bolts from the front of the mounting adapter plate.
Figure 59
Removing Bolts from Mounting Adapter Plate
Step 2
Remove the flat and split washers, insulating bushings, and mounting plate from the RU.
Fujitsu and Fujitsu Customer Use Only
·
Issue 1.1, May 2021
Release 1.0