Kenwood DPX505BT Quick Start Manual
Hide thumbs Also See for DPX505BT:
Table of Contents

Advertisement

Available languages

Available languages

DPX505BT
DUAL DIN SIZED CD RECEIVER
Quick Start Guide
RECEPTEUR CD FORMAT DUAL DIN
Guide de démarrage rapide
RECEPTOR DUAL DE CD TAMAÑO DIN
Guía de inicio rápido
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call
upon your Kenwood dealer for information or service on the product.
Model DPX505BT
Serial number
US Residents Only
© 2022 JVCKENWOOD Corporation
Register Online
Register your Kenwood product at https://www.kenwood.com/usa/
For detailed operations and information, refer to the INSTRUCTION MANUAL on the following website:
Pour les opérations et les informations détaillées, reportez-vous au MODE D'EMPLOI sur le site web
suivant:
Para obtener más información y detalles sobre las operaciones, consulte el MANUAL DE
INSTRUCCIONES en el siguiente sitio web:
<https://www.kenwood.com/cs/ce/>
ENGLISH
FRANÇAIS
ESPAÑOL
B5K-0891-00 [KN]

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood DPX505BT

  • Page 1 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
  • Page 2 Los equipos eléctricos y electrónicos al final Products: DUAL DIN SIZED CD RECEIVER de la vida útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento Model Name: DPX505BT adecuado a estos productos y a sus subproductos residuales correspondientes. Responsible Party: JVCKENWOOD USA CORPORATION Póngase en contacto con su administración local para obtener información sobre el...
  • Page 3 ISED Caution CAUTION This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio conditions: frequency (RF) Exposure rules.
  • Page 4 SOFTWARE LICENSE AGREEMENT Article 4 Right pertaining to the Licensed Software The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is Any and all copyrights and other rights pertaining to the Licensed Software and related documents copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or which Users shall follow in order to use the Licensed Software.
  • Page 5: Important Notice Concerning The Software

    Important Notice concerning the Software Article 9 Destruction of the Licensed Software If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed -jansson Software, any related documents and copies thereof within two (2) weeks from such date of termination. Copyright (c) 2009-2012 Petri Lehtinen <petri@digip.org>...
  • Page 6 -CMP sha2 AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/ The MIT License (MIT) Copyright (c) 2014 Charles Gunyon Copyright (c) 2000-2001, Aaron D. Gifford All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without You may obtain a copy of the license at limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the...
  • Page 7 Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. T-Kernel 2.0 This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum Author: Chris G. Demetriou (www.tron.org) Permission to use, copy, modify and distribute this software and its documentation is hereby granted, BSD-3-Clause provided that both the copyright notice and this permission notice appear in all copies of the software, Copyright (c) 2000-2001, Aaron D.
  • Page 8: Basic Procedure

    Installation/Connection Basic procedure Remove the key from the ignition switch, then disconnect the terminal of the car battery. This section is for the professional installer. Connect the wires properly. See “Wiring connection” on page 3. For safety’s sake, leave wiring and mounting to professionals. Consult the Install the unit to your car.
  • Page 9: Before Use

    Before Use Wiring connection IMPORTANT • To ensure proper use, please read through this Guide before using this product. It is especially important that you read and observe Warnings and Cautions in this Guide. Antenna terminal • Please keep the Guide in a safe and accessible place for future reference. WARNING Fuse (10 A) Do not operate any function that takes your attention away from safe...
  • Page 10 Basics On the faceplate Turn on the power Press B SRC. Faceplate • Press and hold to turn off the power. Adjust the volume Turn the volume knob. Select a source Press B SRC repeatedly. Change the display information Press DISP repeatedly. 1 Loading slot How to reset 2 Display window*...
  • Page 11: Getting Started

    Getting Started Turn the volume knob to select [DATE SET], then press the knob. Turn the volume knob to make the settings, then press the knob. Set the date in the order of “Day”  “Month”  “Year” or “Month”  “Day”  Select the display language and cancel the “Year”.
  • Page 12: Start Playback

    Radio CD/USB/iPod Selectable source: Search for a station CD/USB/iPod USB or iPod BT Press B SRC repeatedly to select RADIO. Press BAND repeatedly to select FM1/FM2/FM3/AM. Start playback Press S / T to search for a station. The source changes automatically and playback starts when you load a disc or attach a device (USB device/ iPod/iPhone) to the USB input terminal.
  • Page 13: Functions Settings

    Turn the volume knob to select [AUDIO CONTROL], then press the knob. • Refer to the INSTRUCTION MANUAL on the following website for the detailed explanation of each item: <https://www.kenwood.com/cs/ce/> Turn the volume knob to select [SUBWOOFER SET], then press the knob.
  • Page 14: Illumination Color Setting

    Press the volume knob to enter [FUNCTION]. For playback operations of AUX, SiriusXM® Radio and AMAZON ALEXA sources, refer to the INSTRUCTION MANUAL on the following website: <https://www.kenwood.com/cs/ce/> Turn the volume knob to select [DISPLAY], then press the knob. Note for specifications Bluetooth Frequency Range: 2.402 GHz —...
  • Page 15: Connect The Microphone

    Press and hold Press B SRC to turn on the unit. Repeat play Press 4 repeatedly. Search and select the name of your receiver (“DPX505BT”) on the Bluetooth device. Random play Press and hold 3 to select [ALL RANDOM] “PAIRING”...
  • Page 16: Procédure De Base

    Installation/Connexion Procédure de base Retirez la clé de contact, puis déconnectez la borne de la batterie de la voiture. Cette section est réservée aux installateurs professionnels. Connectez les fils correctement. Voir “Connexions” à la page 3. Pour des raison de sécurité, laissez le travail de câblage et de montage des Installez l’appareil dans votre voiture.
  • Page 17: Avant L'utilisation

    Avant l’utilisation Connexions IMPORTANTES • Pour utiliser correctement l’appareil, veuillez lire ce Guide complément avant de l’utiliser. Il est particulièrement important que vous lisiez et acceptiez les avertissements et les précautions de ce Guide. • Veuillez garder ce Guide dans un endroit sûr et accessible pour une utilisation Borne de l’antenne future.
  • Page 18: Fonctionnement De Base

    Fonctionnement de base Pour Sur la façade Mettez l’appareil sous tension Appuyez sur B SRC. Façade • Maintenez la touche enfoncée pour mettre l’appareil hors tension. Ajustez le volume Tournez le bouton de volume. Sélectionner la source Appuyez répétitivement sur B SRC. Changez l’information sur Appuyez répétitivement sur DISP.
  • Page 19: Prise En Main

    Prise en main Tournez le bouton de volume pour choisir [DATE SET], puis appuyez sur le bouton. Tournez le bouton de volume pour faire les réglages, puis appuyez sur le bouton. Sélectionne la langue d’affichage et annule la Réglez la date dans l’ordre “Jour”  “Mois”  “Année” ou “Mois”  “Jour”  démonstration “Année”.
  • Page 20 Radio CD/USB/iPod Source sélectionnable: Recherchez une station CD/USB/iPod USB ou iPod BT Appuyez répétitivement sur B SRC pour sélectionner RADIO. Appuyez répétitivement sur BAND pour sélectionner FM1/FM2/FM3/AM. Démarrez la lecture Appuyez sur S / T pour recherche une station. La source change automatiquement et la lecture démarre quand vous insérez un disque ou connectez un périphérique (périphérique USB/ iPod/iPhone) à...
  • Page 21: Réglages Des Fonctions

    Pour retourner à l’option de réglage précédente, appuyez sur • Reportez-vous au MODE D’EMPLOI sur les sites web suivant pour une explication détaillée de chaque élément: <https://www.kenwood.com/cs/ce/> Tournez le bouton de volume pour choisir [SUBWOOFER SET], puis appuyez sur le bouton.
  • Page 22: Réglage De La Couleur D'éclairage

    Pour les opérations de lecture de sources AUX, Radio SiriusXM® et AMAZON Appuyez sur le bouton de volume pour entrer [FUNCTION]. ALEXA, reportez-vous au MODE D’EMPLOI sur le site web suivant: <https://www.kenwood.com/cs/ce/> Tournez le bouton de volume pour choisir [DISPLAY], puis appuyez sur le Remarque pour les spécifications bouton.
  • Page 23: Répondre À Un Appel

    Bluetooth pour la première fois Recherche rapide vers l’arrière/ Maintenez enfoncée Appuyez sur B SRC pour mettre l’appareil sous tension. vers l’avant Recherchez et sélectionnez le nom de votre récepteur (“DPX505BT”) sur le périphérique Bluetooth. Lecture répétée Appuyez répétitivement sur 4 “PAIRING”...
  • Page 24: Procedimiento Básico

    Instalación/Conexión Procedimiento básico Quite la llave del interruptor de encendido; después, desconecte el terminal de la batería del automóvil. Esta sección es para los instaladores profesionales. Conecte los cables correctamente. Consulte “Conexión del cableado” en la Para fines de seguridad, deje que un profesional realice el cableado y el página 3.
  • Page 25: Antes Del Uso

    Antes del uso Conexión del cableado IMPORTANTE • Antes de utilizar este producto y para asegurar su uso correcto, lea esta guía por completo. En especial, lea y observe las Advertencias y Precauciones incluidas en esta guía. • Guarde la guía en un lugar seguro y accesible para futuras consultas. Terminal de la antena ADVERTENCIA No utilice ninguna función que pueda desviar su atención mientras está...
  • Page 26: Puntos Básicos

    Puntos básicos Para En la placa frontal Encender la unidad Pulse B SRC. Placa frontal • Pulse y mantenga pulsado para apagar la unidad. Ajustar el volumen Gire la rueda de volumen. Seleccionar una fuente Pulse B SRC repetidamente. Cambiar la información en Pulse DISP repetidamente.
  • Page 27: Procedimientos Iniciales

    Procedimientos iniciales Gire la rueda de volumen para seleccionar [DATE SET] y, a continuación, pulse la rueda. Gire la rueda de volumen para realizar los ajustes y, a continuación, pulse la rueda. Seleccione el idioma de visualización y cancele la Ajuste la fecha en el orden de “Día”  “Mes”  “Año” o “Mes”  “Día”  “Año”. demostración Para salir, pulse y mantenga pulsado Cuando enciende la unidad por primera vez (o [FACTORY RESET] está...
  • Page 28 Radio CD/USB/iPod Fuente seleccionable: Búsqueda de una emisora CD/USB/iPod USB o iPod BT Pulse B SRC repetidamente para seleccionar RADIO. Pulse BAND repetidamente para seleccionar FM1/FM2/FM3/AM. Inicie la reproducción Pulse S / T para buscar una emisora. La fuente cambia automáticamente y la reproducción se inicia al cargar un disco o al conectar un dispositivo (dispositivo USB/ iPod/iPhone) al terminal de entrada Ajustes en la memoria USB.
  • Page 29 • Para obtener más detalles sobre cada una de las opciones, consulte el MANUAL DE INSTRUCCIONES en el siguiente sitio web: <https://www.kenwood.com/cs/ce/> Gire la rueda de volumen para seleccionar [SUBWOOFER SET] y, a continuación, pulse la rueda.
  • Page 30: Ajuste Del Color De Iluminación

    Pulse la rueda de volumen para ingresar en [FUNCTION]. SiriusXM® y AMAZON ALEXA, consulte el MANUAL DE INSTRUCCIONES en el siguiente sitio web: <https://www.kenwood.com/cs/ce/> Gire la rueda de volumen para seleccionar [DISPLAY] y, a continuación, pulse Nota sobre las especificaciones la rueda.
  • Page 31: Contestar Una Llamada

    Pulse hacia delante Bluetooth Retroceder/avanzar rápidamente Pulse y mantenga pulsado Pulse B SRC para encender la unidad. Busque y seleccione el nombre de su receptor (“DPX505BT”) en el Repetir reproducción Pulse 4 repetidamente. dispositivo Bluetooth. Reproducción aleatoria Pulse y mantenga pulsado 3 para En la pantalla aparece los mensajes “PAIRING”...
  • Page 32 • Windows Media is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft. •...

Table of Contents