Selecting The Input Source; Selecting The Input Mode - LG AR702TT Owner's Manual

Selecting the input source

This section explains how to select the input source (i.e.,
the AV component that you want to listen to or watch).
1. Press POWER ( or
/ l
2. Select a source by rotating the INPUT SELECT
on the front panel.
The selected source appears in the display window.
To select the
Built-in tuner
DVD player
Portable player
VCR
CD or Super Audio CD player
Camcorder or TV game
Satellite tuner
USB device
PC
Component with HDMI jack
iPod
To select the required input source using the
remote control you must ensure that the remote is
in the receiver mode. This can be verified by
pressing the RECEIVER button until it can be seen
illuminated. Once in the receiver mode simply press
the INPUT. SEL. button until it is lit and then press
the numerical key that corresponds with the desired
input. Subsequent presses of the numerical keys
will also switch to the input shown on the remote.
To cancel this function simply press the INPUT.
SEL. button again until it is not illuminated.
Press the
To select the
TUNER button
Built-in tuner
repeatedly.( )
DVD button.( )
DVD player
PORTABLE
Portable player
button.( )
VCR button.( )
VCR
CD button.( )
CD
AV button.( )
Camcorder or
TV game
TV/STB button.
Satellite tuner
( )
USB button.( )
USB device
PC-LINK button.
PC
( )
HDMI1/2 button.
Component with
( )
HDMI jack
iPod button.
iPod
3. Turn on the component and start playback.
4. To adjust the volume, rotate the MASTER
) to turn the unit on.

Selecting the input mode

If you connect a component to a digital input jack, you
must assign that jack to an input source.
Display
1. Select the input source that you want to
Tuner or frequency
DVD
Portable
2. Press DIGITAL.
VCR
CD
AV
3. Press DIGITAL repeatedly to select Opt. 1,
TV/STB
USB
PC-LINK
HDMI 1/ HDMI 2
iPod
Notes
You can select the input mode only when you set
•
the input source to DVD, VCR, CD, AV, or TV/STB.
Display
Tuner or
Input source
frequency
DVD
DVD
VCR
Portable
CD
AV
VCR
TV/STB
CD
AV
You can also select other input mode on the
•
selected input source.
TV/STB
To mute the sound
NO USB
Press MUTE on the remote control. To cancel, press it
PC-LINK
again.
HDMI1/HDMI2
iPod
VOLUME on the front panel, or press VOLUME
(-/+) on remote control.
assign.
Some of input sources may not be assigned.
The current assignment flashes in the display
window.
Opt. 2, Opt. 3, Coaxial or Analog.
Examples:
If you connect your DVD player to the
OPTICAL IN 1 jack, set "DVD" to "Opt. 1".
If you want to listen to audio from the component
connected to the OPTICAL IN 2 jack when the
VCR input source is selected, set "VCR" to "Opt.
2".
If you want to listen to audio from the component
connected to the COAXIAL IN jack when the
TV/STB input source is selected, set "TV/STB" to
"Coaxial".
For input source that you don't want to assign a
digital input jack, set to "Analog".
Initial setting
OPTICAL 1
ANALOG
COAXIAL
OPTICAL 3
OPTICAL 2
Display
Opt. 1
Analog
Coaxial
Opt. 3
Opt. 2
25