Kenwood SG-5260 Instruction Manual page 14

@) STEP (FREQ) Key
Used to decrease or increase the frequency.
@ STEP (LEVEL) Key
Used to decrease or increase the output l e v e l .
< § ) LEVEL Display
Indicates the output l e v e l .
m LEVEL PRESET (A, B, C, D) Keys
Output level memory can be stored in these 4 keys.
© Level Unit Selector/Output
Level unit selector:
To select the output level unit.
EMF dB/z: Using 1 u V open voltage as the r e f e r e n c e , the output l e v e l i s
dBm
Output impedance selector:
When t h e 2nd F key ©
act i v a t e d , the output impedance can be se l e c t a b l e ( 5 0 Q or
75Q)
® RF output terminal
RF output terminal with an impedance of 50Q or 75Q.
I f e x t e r n a l e l e c t r i c power i s applied by mistake, the protect ion function
works to turn o f f the output.
with 50W or higher power.
14
Impedance Selector Switch
expressed as EMF dB//.
: Using 1 m W , 50Q or 75Q load as the reference, the output level
is expressed as dBm.
by pressing t h i s key.
i s p r e s s e d and second f u n c t ion mode
However, t h i s terminal must not be applied