Part Mode 1 Name; Part Mode 2 Name; Auto Arming - Bosch Solution 6000 User Manual

User Guide
Solution 6000
The keypad will display the following:
Area Name A1
Security System
Press


3. Use the [] and [] keys to scroll the cursor left
and right across the area name text. Use the [] and
[] keys to scroll through the different characters
available. To clear all text from the cursor position
to the right, press the [OFF] key.
4. When the user name is complete, press [OK].
Areas > Area Properties >

Part Mode 1 Name

This menu allows you to program a name for the part mode
1. Each area can have its own part mode 1 name if required.
Up to 20 characters can be entered to help explain the
behaviour of the area when it is armed in part mode 1. For
example, Downstairs all armed or Shed Disarmed.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [2] + [1] + [6].
A list of different areas will display on the keypad.
2. Use the [] and [] keys to select the area that you
want to program the part mode 1 name for, then
press [OK] to select. Alternatively, you can enter the
area number that you want to program the name,
then press [OK].
The keypad will display the following:
Part Mode 1 Name A1
Part 1 Area 1 Name
Press


3. Use the [] and [] keys to scroll the cursor left and
right across the name text. Use the [] and [] keys
to scroll through the different characters available.
To clear all text from the cursor position to the right,
press the [OFF] key.
4. When the name is complete, press [OK].
Areas > Area Properties >

Part Mode 2 Name

This menu allows you to program a name for the part mode
2. Each area can have its own part mode 2 name if required.
Up to 20 characters can be entered to help explain the
behaviour of the area when it is armed in part mode 2. For
example, Downstairs all armed or Shed Disarmed.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [2] + [1] + [7].
A list of different areas will display on the keypad.
20
OK to SAVE
MENU 2-1-6
OK to SAVE
MENU 2-1-7
2. Use the [] and [] keys to select the area that you
want to program the part mode 2 name for, then
press [OK] to select. Alternatively, you can enter the
area number that you want to program the name,
then press [OK].
The keypad will display the following:
Part Mode 2 Name A1
Part 2 Area 1 Name
Press


3. Use the [] and [] keys to scroll the cursor left and
right across the name text. Use the [] and [] keys
to scroll through the different characters available.
To clear all text from the cursor position to the right,
press the [OFF] key.
4. When the name is complete, press [OK].
Areas > Area Properties >

Auto Arming

This menu allows you to program which timezone will be
used by the system to auto arm and or, auto disarm the
system or area. Before setting this option you should make
sure the timezone has been configured in MENU 7-5-0.
Generally a timezone configured for auto arming should
be given a name that indicates its function.
The system has a maximum of 16 available timezones and
only one timezone can be programmed for each area. The
auto arm function can only be used to fully arm the area.
There is currently no way to auto arm the area in part mode.
The area will automatically arm when the start time in
the sellected timezone is reached provided the day of the
week is also set.
The area will automatically disarm when the stop time in
the sellected timezone is reached provided the day of the
week is also set.
If auto disarming is not required then you should not set
the stop time in the selected timezone. See MENU 7-5-0 for
more information on configuring timezones.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [2] + [1] + [8].
A list of available areas will display on the keypad.
2. Use the [] and [] keys to select the area that you
want to program the auto arm time for, then press
[OK] to select. Alternatively, you can enter the area
number that you want to program, then press [OK].
The keypad will display the following:
Bosch Security Systems 12/14 BLCC610U
OK to SAVE
MENU 2-1-8