Installing Modules On The Carriers; Unsupported Modules - GE PACSystems RX3i User Manual

Cep profinet scanner

Hide thumbs Also See for PACSystems RX3i:

Table of Contents

Chapter 3. Installation and Mounting

3.2 Installing Modules on the Carriers

The insertion and removal of I/O modules is the same as in a RX3i Universal Backplane. For details, refer to, the

PACSystems RX3i System Manual, GFK-2314.

Do not install a Power Supply module on the CEP or CEE Carrier. Attempting to do

so could damage the module and/or the Carrier.

Caution

If an unsupported module is inserted in the CEP or CEE Carrier, the module will not

be recognized correctly and could cause damage to the Carrier or the module.

Caution

When an unsupported I/O module is inserted in either the RX3i CEP Carrier or RX3i CEE Expansion Carrier, no

alarm is reported to indicate this.

Some unsupported I/O modules have the same Distinguishing Class (for example, IC694MDL740 has the same

Distinguishing Class as IC694MDL742). Refer to Section 1.6,

Note:

For the latest updated list of supported I/O modules, refer to the Important Product

Information document provided with the firmware version on your RX3i CEP product.

Supported I/O Modules.

PACSystems* RX3i CEP PROFINET Scanner

GFK-2883E

Table of Contents