Bosch UniversalTemp Original Instructions Manual page 18

18 | English
Warning! If operating or adjustment devices other than those specified here are
u
used or other procedures are carried out, this can lead to dangerous exposure to
radiation.
The measuring tool is delivered with a laser warning sign (marked in the illustra-
u
tion of the measuring tool on the graphics page).
If the text of the laser warning label is not in your national language, stick the
u
provided warning label in your national language over it before operating for the
first time.
Do not direct the laser beam at persons or animals and do not
stare into the direct or reflected laser beam yourself. You could
blind somebody, cause accidents or damage your eyes.
If laser radiation hits your eye, you must close your eyes and immediately turn
u
your head away from the beam.
Do not make any modifications to the laser equipment.
u
Do not use the laser goggles (accessory) as protective goggles. The laser goggles
u
make the laser beam easier to see; they do not protect you against laser radiation.
Do not use the laser goggles (accessory) as sunglasses or while driving. The laser
u
goggles do not provide full UV protection and impair your ability to see colours.
Have the measuring tool serviced only by a qualified specialist using only ori-
u
ginal replacement parts. This will ensure that the safety of the measuring tool is
maintained.
Do not let children use the laser measuring tool unsupervised. They could unin-
u
tentionally blind themselves or other persons.
Do not use the measuring tool in explosive atmospheres which contain flam-
u
mable liquids, gases or dust. Sparks may be produced inside the measuring tool,
which can ignite dust or fumes.
The measuring tool may not be 100% accurate for technological reasons. Envir-
u
onmental factors (e.g. dust or steam in the area being measured), temperature fluctu-
ations (e.g. from fan heater) as well as the nature and condition of the surfaces being
measured (e.g. highly reflective or transparent materials) can distort measurement
readings.
Protect the measuring tool, particularly the area around the infrared lens and
u
laser, from moisture and snow. The reception lens could fog up and distort the
measurements. Incorrect settings on the tool and other atmospheric influences may
1 609 92A 7MA | (10.06.2022) Bosch Power Tools