Advertisement
Position
Movement
9
Tool in. The function also operates when the right top button is pushed down. Arm 1 and 2 can be
operated in parallel and when you move the tool when the right top button is pushed down.
10
Tool out. The function also operates when the right top button is pushed down. Arm 1 and 2 can be
operated in parallel and when you move the tool when the right top button is pushed down.
"Pattern test mode"
The "Pattern test mode" shows how the product will
operate when you use the joysticks on the remote
control. Different operation modes and patterns will give
different operation movements. To enter the pattern test
mode, turn the ON/OFF/START switch to the ON
position and select "Pattern test mode" in the quick
action bar. The display color (A) changes from orange to
blue. The product symbol (B) in the display has different
colors and shows the movement of the product parts.
A
B
•
Light blue: Product parts that are movable in the
current operation mode.
•
Orange: Product parts that move in the current
operation mode. A white arrow will also show the
direction of movement on the display.
•
Dark blue: Product parts that cannot move in the
current operation mode.
In the quick action bar, you can change the pattern (C).
When a pattern is selected, it is shown in the display
(D). Change the operation mode with the operation
1401 - 002 - 15.10.2021
D
C
mode switch (E) and the transport mode switch (F) on
the remote control.
F
1
3
E
"Calibrate hydraulics"
•
The function "Auto (calibrate)" calibrates the
hydraulic pressure and the valves on the product.
Select between "Pressure and valves" and
"Pressure".
The valve calibration makes the control of the
product movements better. The hydraulic pressure
calibration makes the precision of the hydraulic
pressure levels better.
"Pressure" will only calibrate the hydraulic pressure
control function and does not adjust customer
specified valve adjustment. Refer to
hydraulics with "Auto (calibrate)" on page 50 .
•
With the function "Manual (calibrate)" you can
calibrate components on the product one by one.
•
With the function "Boom pressure" you can adjust
the maximum hydraulic pressure for the arm system.
The hydraulic pressure changes with 5 bar/72.5 psi
intervals. Adjust the hydraulic pressure between 200
bar/2901 psi to 150 bar/2175.6 psi.
•
"Reset to factory settings" resets the hydraulic
system.
To calibrate the
49
Advertisement
