Cisco 700 MHz Installation And Upgrade Manual page 32

Mounting the Cisco Unified MeetingPlace 8100 Series
To Mount the Breakout Box for a T1 PRI or E1 Cisco Unified MeetingPlace System
Step 1 Locate the breakout box that shipped with the Cisco Unified MeetingPlace Audio Server.
Step 2 Locate the screws for mounting the breakout box that came with the Cisco Unified MeetingPlace Audio
Server.
Step 3 Use a screwdriver to mount the breakout box in the position directly above the Cisco Unified
MeetingPlace Audio Server in the rack, as shown in the applicable figure:
Cisco Unified MeetingPlace 8106
Cisco Unified MeetingPlace 8112
If applicable, mount the second breakout box by repeating
Step 4
box directly above the first breakout box. See
Figure 2-5
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
2-8
Chapter 2
See Figure
See Figure
Mounting the Breakout Box for a Cisco Unified MeetingPlace 8106
Installing the Cisco Unified MeetingPlace 8100 Series Hardware
2-5.
2-6.
Step 2 and Step
Figure 2-7.
3. Place the second breakout
OL-13417-01