Page 1
OWNER’S MANUAL คู ่ ม ื อ การใช้ ง าน New Type Cyclone Vacuum Cleaner เครื ่ อ งดู ด ฝุ ่ น แบบไซโคลนรุ ่ น ใหม่ This information contains important instructions for the safe use and maintenance of the vacuum cleaner. Especially, please read all of the information on page 4-5 for your safety.
Park mode Storage ก า ร ก เ บ ็ ข ณ ใ ะ ช ง ้ า น อ ่ ู ย ก า ร ก เ บ ็ • To store during vacuuming, for example • When you have switched off and to move a small piece of furniture or a rug, unplugged the vacuum cleaner, use park mode to support the flexible hose...
Page 13
How to use Using carpet and floor nozzle / Hard Floor Nozzle วิ ธ ี ก ารใช้ ง าน หั ว ดู ด พื ้ น ใช้ ส ำหรั บ ดู ด พื ้ น / พรม Carpet พรม Pedal คั...
How to use Using the sani punch nozzle วิ ธ ี ก ารใช้ ง าน ก า ใ ร ช า ง ้ น ห ว ั ด ด ู ร ไ ฝ น ่ ุ ส ำ ห ร บ...
Page 19
This sani punch nozzle is for effective cleaning of beds and blankets to remove mites and dust. ห ว ั ด ด ู Effective cleaning Bed & blanket Bulky & heavy blanket Light blanket & sheet When using on the bed When using on the floor Lay out the blanket It is easier to clean a light blanket or sheet...
Page 20
For simple cleaning of the vacuum nozzle, detach the Sani Punch nozzle from the telescopic tube and attach the crevice tool to vacuum dust. Since the vibrator inside is composed of precision parts, never disassemble the body. Be careful not to let foreign objects clog the air suction part on top of the vacuum nozzle. Since removal of the punch bar may cause performance problems, do not warp or remove it.
Page 21
Follow the instruction below for through washing. (Do not soak the entire body of the vacuum nozzle in water, it may cause the vibrator to malfunction) Bottom plate Punch bar Bottom plate Bottom plate Press the button on the Wipe all the soiled parts Wash the removed bot-tom rear side of the vacuum of the vacuum nozzle...
Page 22
Projection Push the button 2-3 times When the dust is fully when the dust is filled in filled after cleaning, the dustbin while cleaning take the bin and turn it counterclockwise to disconnect Take the bin to fix into Waste the dust in the projection part and the bin then turn it clockwise to...
What to do if your vacuum cleaner does not work? ถ้ า เครื ่ อ งดู ด ฝุ ่ น ไม่ ท ำงาน จะทำอย่ า งไร ? Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working. ตรวจสอบปลั...