Advertisement

Quick Links

DWK096751B
Internet: http:/ / www.bos ch-haus geraete.de
B os ch Info-Team: de Tel. 01 80/ 5 30 40 50 (E 0,14/ Min. DTAG )
en
Operating and installation
instructions

Advertisement

Table of Contents
loading

Summary of Contents for Bosch DWK096751B

  • Page 1 DWK096751B Operating and installation instructions Internet: http:/ / www.bos ch-haus geraete.de B os ch Info-Team: de Tel. 01 80/ 5 30 40 50 (E 0,14/ Min. DTAG )
  • Page 3: Description Of Appliance

    Operating Instructions Description of appliance Operating modes Light / fan Chimney switches If the air intake is inadequate, there is a risk of poisoning from combustion gases which are drawn back into the room. An air-intake/exhaust-air wall box by itself is no guarantee that the limiting value will not be ex- ceeded.
  • Page 4: Safety Instructions

    Before using for the first time Important notes: Safety instructions  The Instructions for Use apply to several ver- Do not flambé food directly under the extractor sions of this appliance. Accordingly, you may hood. find descriptions of individual features that do Risk of grease filter catching fire due to flames.
  • Page 5 Operating the extractor hood The most effective method of removing vapours produced during cooking is to:  Switch the ventilator ON as soon as you begin cooking.  Switch the ventilator OFF a few minutes after you have finished cooking. Function Display Switches the extractor mo- It shows the tor on and off at the latest...
  • Page 6: Filters And Maintenance

    Filters and maintenance Ducting panels Grease filters: The ducting panels must never be washed in a Metal-mesh filters are used to trap the grease dishwasher. particles in the cooking vapours.  Open the ducting panels pulling them down- The filter mats are made from noncombustible wards.
  • Page 7: Activated Carbon Filter

    Filters and maintenance Filters and maintenance  Remove the saturated charcoal filter by releas- Activated carbon filter: ing the fixing hooks. For neutralizing odours in recirculating mode. Caution: As the filter becomes more and more saturated with grease, there is an increased risk of fire and the function of the hood may be impaired.
  • Page 8: Cleaning And Care

    Cleaning and care Replacing the light bulbs Isolate the extractor hood by pulling out the 1. Switch off the extractor hood and pull out the mains plug or switching off the fuse. mains plug or switch off the electricity supply at  When cleaning the grease filters, remove the fuse box.
  • Page 9: Installation Instructions

    Installation Instructions: Important information Old appliances are not worthless rubbish. Valu- Additional information concerning gas cookers: able raw materials can be reclaimed by recycling old When installing gas hotplates, comply with the appliances. Before disposing of your old appliance, relevant national statutory regulations (e.g. in Ger- render it unusable.
  • Page 10: Prior To Installation

    Prior to installation Exhaust-air mode ��� ��� ��� ��� The exhaust air is discharged upwards through a ventilation shaft or directly through the outside wall into the open. Exhaust air should neither be directed into An air-intake/exhaust-air wall box by itself is no a smoke or exhaust flue that is currently used for guarantee that the limiting value will not be ex- other purposes, nor into a shaft that is used for...
  • Page 11: Electrical Connection

    Prior to installation Electrical connection  Round pipes: WARNING: THIS APPLIANCE MUST BE We recommend EARTHED Internal diameter: 150 mm (at least 120 mm). IMPORTANT: Fitting a Different Plug:  Flat ducts must have an internal crosssection that equates to that of round pipes. The wires in the mains lead are coloured in accord- There should be no sharp bends.
  • Page 12: Installation

    Electrical connection Installation Ensure that the minimum distance between the Electrical data: hob and the extractor hood is maintained – 400 mm Are to be found on the name plate inside the appli- for the electric or gas hob. ance after removal of the filterframe. 4.
  • Page 13: Chimney Assembly

    Installation Connection in Ducting Version Chimney assembly When installing the ducting version, connect the Upper Chimney hood to the chimney using either a flexible or rigid  Slightly widen the two sides of the upper Chim- pipe ø 150 or 120 mm, the choice of which is left to ney and hook them behind the brackets 7.2.1, the installer.
  • Page 14 Notizen - Notes - Note - Notulen - Notas - σημείωση...
  • Page 15 DHZ5475...
  • Page 16 Robert Bosch Hausgeräte GmbH 436004612_01 - 090218...

Table of Contents