Table of Contents
Advertisement
Calculating the countertop cut-out
The frames of the ProLine elements overlap the countertop at the outside right
and left by 5/16" (8 mm) on each side.
Add up the widths of the ProLine elements and subtract 5/8" (16 mm) from this
sum.
Example:
11 5/16" + 11 5/16" + 14 15/16" = 37 5/8" - 5/8" = 37"
(288 mm + 288 mm + 380 mm = 956 mm - 16 mm = 940 mm)
The ProLine elements are 11 5/16", 14 15/16" or 22 11/16" (288 mm, 380 mm or
576 mm) wide depending on the model (see "Installation" – "Installation dimen-
sions").
Spacer bars
When installing several ProLine elements, a spacer bar must be installed between
the individual appliances. The position for securing the spacer bar will depend on
the width of the ProLine element.
Installation
41
Advertisement
Table of Contents
