Help With Minor Problems; Fault Displays - Bosch Avantixx WVD24460GB Operating And Installation Instructions

Wash + dry
Table of Contents

Advertisement

Help with minor problems

Fault displays

Text in display field
and signal emitted
F:16
F:17
F:18
47
If repairs are needed, and assuming that you cannot
eliminate the fault yourself with the aid the following ta-
ble:
m
Repairs may be carried out by customer service or
authorised technicians only.
Possible cause
Door not closed properly.
Tap not turned on.
Inlet hose kinked or pinched. Elirinate cause.
Filter blocked in water inlet
hose.
Water pressure too low.
Loose debris is blocking the
purp.
Drainage pipe and/or
drainage hose blocked.
There is too much residual
water in the drum when drying.
Turn the programme selector to Off.
Disconnect the appliance from the mains.
Turn off the tap.
Call customer service, see page 52.
Risk of electric shock!
Remedial action
Check whether laundry is trapped in door;
Close the washer-dryer door.
Turn the tap on.
Clean filter, see page 45.
Eliminate cause.
Clean the purp, see page 44.
Clean drainage pipe and/or drainage hose.
Stop the drying programme, select the " Spin Í"
programme before drying.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avantixx wvd24460

Table of Contents