Using the Function Control
About the Function control screen
Using Function control, you can check at a glance and change the current
settings of the following items: SUBTITLE, ANGLE, AUDIO, VIRTUAL DOLBY,
DIGITAL GAMMA and DIGITAL SUPER PICTURE.
Function control also allows you three ways of direct skips (title,chapter and
time).
• While the disc is playing, press FUNCTION to display the screen shown below.
• During playback, you can also use SETUP/ADJ. on the Player to display the
Function control screen.
• Pressing ' or " changes the currently selected item.
• Pressing SHIFT while making playback settings using the Remote enables
disc operations, while leaving the playback setup screen on the display.
• To exit the setup operation, press RETURN. This returns to the screen that
was shown before the Setup screen was displayed.
1
Direct title/track skip
2
Direct chapter skip
3
Direct time skip
4
Subtitle
5
Angle
6
Audio
7
VIRTUAL DOLBY
8
DIGITAL GAMMA
9
DIGITAL SUPER
PICTURE
• Numbers in
refer to the pages where the setting procedures are described.
1
1
1
1
1
Direct title/track skip
• The number of the title/track currently played back is displayed.
• You can skip directly to the desired title/track.
Played back image
2/5
8/3‰
‰1:3‰:‰8
2 ENGLISH
1
.
1
5. 1 ch
ON
ON
ON
BIT RATE indicates the amount of
Currently
data that is being transferred to the
selected item
Player per second. However, note that
picture quality is not always in
proportion to the bit rate.
79
Operation Status
indicator
DVD