Advertisement
Safety
The instructions related to the safety indicated in
the following are for preventing unexpected danger
or damage in advance by safely and exactly using
the product.
Non-compliance of the instructions may immedia-
tely cause serious injury or death.
Non-compliance of the instructions may cause
death or serious injury to the user.
Non-compliance of the instructions may cause
injury or property damage to the user.
①Do not contact with electrically active parts of
the panel, such as terminals, regardless of
connection of the module. It may result in spark
or lethal electric shock.
②Please don't use the module with the broken
window or the torn back side. There is a danger
of electric shock.
①
①Please perform works in the dry condition and
use only dry tools. Do not handle the wet panels
without protection equipment. It may result in
safety accident.
②Damaged module must be treated with safety
protection equipment. It may result in injury.
③Do not approach the damaged or broken module
unless you are an expert. It may result in serious
injury.
④No electrical parts like cables are located after
installation between laminate and mounting
structure.
⑤Do Not reconnect or repair Junction box Cable.
It may occur spark or electric shock.
⑥ Do not bending junction box's cable. While
under stress, it may occur module damage.
Cable bending radius should be more than
4 times the cable diameter, at least.
①
②
③
④
⑤
All manuals and user guides at all-guides.com
②
①Please use proper equipment, connector, wire
and buttress for system configuration of the
module. It may result in damage or failure of the
product.
②Do not perform installation in rainy, heavily
windy or snowy days. It may result in safety
accident.
③Do not make holes in the frame or glass of the
module. It may decrease the strength of the
frame or break the glass.
④Do not touch the glass surface or frame of the
solar module after installation of the module. It
may result in injury.
⑤Do not locate a heavy object onto the module.
Do not stand on or step on the module. Do not
drop or suddenly lay down the module. It may
result in injury.
⑥Do not scratch the coating surface of the frame.
It may decrease the strength due to corrosion of
the frame.
⑦Do not concentrate sunlight on the module
surface. It may result in damage of the product.
⑧Do not apply a shock to the junction box of the
module or pull the cable. Do not remove the
labels attached to the module. It may result in
damage of the product.
⑨If the installing structure has a curved surface
e.g. arch type as shown in the below picture, do
not forcefully modify the module in installation
when connecting it with the structure. Please
install the module in the place where the structure
has been completely set up because deformation
of the structure may cause deformation of the
product when performing installation by using a
crane, etc after assembling the module to the
installing structure.
②
①
④
⑤
⑧
⑦
⑨
③
⑥
3
Advertisement
