Table of Contents
Advertisement
3 Rack mounting
Position in the Rack
This is an example where the recorder and the extension unit (WJ-HXE400 (option), max 2 units) are installed in the rack.
Connect the recorder and the extension unit using the connection cable (1.5 m {4 feet 11 inches}) provided with the extension unit.
(☞ Page 21)
NX300
Extension unit
(Unit number 1)
Extension unit
(Unit number 2)
Note:
• When installing the recorder in the rack, leave a space of 1U (44 mm {1-23/32 inches}) above and below the recorder for ventila-
tion.
• The unit number of the connected extension unit is the same as the external storage connector number of the recorder.
• The extension unit weighs over 10 kg {22.1 lbs}. Be careful not to drop the extension unit when installing it into a rack.
Dropping may cause damage, deformation of the extension unit, or injury.
16
(continued)
Other unit, Rack upper side
Other unit, Rack bottom side
Require a
space of 1U
Connection cable
(provided with
extension unit)
Require a
space of 1U
Require a
space of 1U
Require a
space of 1U
Advertisement
Table of Contents
