Predetermined Breaking Point - Bosch MFW24010 Operating Instructions Manual

Pastry attachment *
16 Dough shaper insert
17 Dividing disc
Noodle attachment *
18 Noodle insert for ribbon noodles
19 Noodle insert for vermicelli
20 Cleaning rod
Shredding attachment *
21 Housing
22 Filler tray
23 Pusher
24 Interchangeable insert
a) Slicing attachment
b) Shredding insert – coarse
c) Shredding insert – fine
d) Grating insert
25 Retaining ring
* for some models:

Predetermined breaking point

To prevent serious damage to your appliance
if the mincer is overloaded, the driver has
a notch on the worm gear (predetermined
breaking point).
If an overload occurs, the driver breaks
instead. A spare part for the drive element
is included in delivery and can easily
be replaced.
To do this, loosen the screw and remove

the damaged driver (Fig.
Attach the new driver with the screw.

Otherwise spare parts with a predetermined
breaking point are not a component
of our warranty obligations. Such spare parts
can be purchased from customer service
(order no. 630701).
Operation
Risk of injury!
Do not insert mains plug until all prepara-
tions for working with the appliance are
complete.
Before operating the appliance and

accessories for the first time, clean
thoroughly; see "Cleaning and servicing".
Robert Bosch Hausgeräte GmbH
).

Assembling the mincer attachment
Fig.

Take perforated disc with required hole

diameter out of the storage compartment.
Insert worm gear into the housing.

Put blade on the worm gear.

Put perforated disc with the required

hole diameter on the worm gear.
Recess on the perforated disc must
be situated on the lug in the housing.
Screw on threaded ring clockwise.

Do not tighten the threaded ring too tight.
Use for:
– processing raw or cooked meat, bacon,
poultry and fish.
– Do not process bones!
– Process steak tartare through the mincer
twice.
Assembling sausage filler attachment
Note:
The parts of the mincer attachment (without
perforated disc and blade) are used.
Fig.

Insert worm gear into the housing.

Insert nozzle into the threaded ring.

Put bearing ring on the worm gear and

hold in place. Recess on the bearing ring
must be situated on the lug in the housing.
Screw on threaded ring with nozzle

clockwise. Do not tighten the threaded
ring too tight.
Use for:
Filling artificial and natural casings with
sausage meat.
Attaching pastry attachment
Note:
The parts of the mincer attachment (without
perforated disc and blade) are used.
Fig.

Insert worm gear into the housing.

Insert dividing disc into the housing.

Recess must be situated on the lug
in the housing.
Insert dough shaper insert into

the threaded ring.
Screw on threaded ring clockwise.

Do not tighten the threaded ring too tight.
en
5