Page 1
LCD PROJECTOR LENS MODEL NO. PLC-LNS07 PLC-LNS08 LENS REPLACEMENT PROCEDURE The focus and zoom of this lens can’t be adjusted by controls on main cabinet or the remote control unit. NOTES ON LENS REPLACEMENT Lens replacement should be performed by the qualified service personnel.
Page 2
LENS REPLACEMENT PROCEDURE Perform the steps for lens replacement. REMOVE THE LENS COVER. (See figure-1.) LENS COVER 1. Turn on the LCD projector. 2. Adjust the lens shift, so that lens is set in the center. 3. Turn off the LCD projector and disconnect the power cord from the AC outlet.
Page 3
INSTALL THE LENS. (See figure-3) LENS MOUNTING BRACKET Remove protective caps(front and back) on the lens. Mount the lens on mounting bracket of the main cabinet with 4 screws. Use the screws included with the lens. Use the driver included with the lens to fasten the screws.
Page 4
This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual...