Page 1
Operating Instructions Expandable Digital Cordless Phone KX-TG9321 Model No. KX-TG9322 This unit is compatible with Caller ID. You must subscribe to the appropriate service offered by your service provider/telephone company. Charge the handset batteries for about 7 hours before initial use.
These conditions can cause fire or electric shock. Confirm that CAUTION smoke has stopped emitting and contact the Panasonic Call Center at 1-800-211- Installation and location PANA (1-800-211-7262). L Unplug from power outlets and never touch L Never install telephone wiring during an the inside of the product if its casing has electrical storm.
L Only use a compatible base unit (or Base unit location/avoiding noise charger) to charge the batteries. Do not The base unit and other compatible Panasonic tamper with the base unit (or charger). units use radio waves to communicate with Failure to follow these instructions may each other.
® As an ENERGY STAR Partner, CAUTION: Risk of explosion if battery is Panasonic has determined that this product replaced by an incorrect type. Dispose of used meets the ENERGY STAR guidelines for batteries according to the instructions. energy efficiency. ENERGY STAR is a U.S.
Page 5
P Charge contacts Controls Base unit Handset A Charge contacts LINE1 message indicator LINE2 message indicator {LOCATOR} A Speaker B Soft keys C Headset jack D {C} (TALK) E {s} (SP-PHONE: Speakerphone) F Dial keypad ({*}: TONE) G {FLASH} {CALL WAIT} H Charge indicator Ringer indicator I Receiver...
Connect the AC adaptor cord (A) by pressing the plug firmly (B). (120 V AC, 60 Hz) Hook L Use only the supplied Panasonic AC adaptor PQLV219. L Use only the supplied telephone line cord. Using another telephone line cord may not allow the unit to work properly.
Page 7
The unit will not work during a power failure. We recommend connecting a corded- type telephone (without AC adaptor) to the same telephone line or to the same telephone line jack using a Panasonic T-adaptor. Emergency power can be supplied to the unit by connecting a Panasonic battery back-up power supply.
Connecting the telephone line cord To connect to a 2-line telephone jack “GREEN” plug 4-wire cord To 2-line telephone jack (RJ14C) To connect to 2 single-line telephone jacks To single-line telephone jacks (RJ11C) “Transparent” plug 2-wire cord Line 1 “GREEN” plug 4-wire cord Line 2 If you use the unit as a single-line telephone only...
L Use the supplied rechargeable at least 15 minutes. batteries. For replacement, we L Clean the charge contacts of the recommend using the Panasonic handset, base unit, and charger with a rechargeable batteries noted on soft and dry cloth once a month. Clean page 3.
L An available line is automatically Answering calls selected and the line number is When a call is being received, the ringer displayed. indicator flashes rapidly. When you finish talking, press Lift the handset and press {C} or {OFF} or place the handset on the {s} when the unit rings.
FCC and other information This equipment complies with Part 68 of the The telephone company may make changes FCC rules and the requirements adopted by in its facilities, equipment, operations or the ACTA. On the bottom of this equipment procedures that could affect the operation of is a label that contains, among other the equipment.
Page 12
WHEN PROGRAMMING EMERGENCY – Consult the dealer or an experienced NUMBERS AND(OR) MAKING TEST radio/TV technician for help. CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to Some cordless telephones operate at the dispatcher the reason for the call. frequencies that may cause interference to 2) Perform such activities in the off-peak nearby TVs and VCRs.
Page 13
One Panasonic Way, Secaucus, New Jersey 07094 Copyright: This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd.