LG 50UH5500 Service Manual page 35

List the basic steps that should typically be followed to remove components and materials requiring
selective treatment:
Unlock screw ("A-17EA") and ("B-4EA")to separate back cover assembly.
1
Unlock screw ("C-4EA") to separate the base.
2 Separate the cushion (D,E) from backcover.
Unlock screw ("F-5EA") to sepparate power board .
3 Unlock screw ("F-4EA") to sepparate main board and AV bracket(G,H).
Unlock screw ("F-8EA") to sepparate wall mounting bracket.
Separate the receive assembly from front cover;
4 Separate the receive board from IR LENS;
Separate the PC sheet (I) from IR LENS.
Unlock screw ("A-1EA") to separate wifi assembly from module backcover.
5
Separate the wifi bracket (J) from wifi assembly.
1.OPTIONAL: Depending upon the complexity of the disassembly process, a graphic depicting the locations
of items contained within the product which require selective treatment
(with descriptions and arrows identifying locations) can be inserted below:
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
Product Disassembly Process
- 35 -
[Fig.1]
[Fig.2]
[Fig.3]
[Fig.4]
[Fig.5]
LGE Internal Use Only