Setup the Wireless System
Note:
If there is a product with a strong electromagnetic field
nearby, interference may occur.
(Ex : Micro wave oven)
Wireless TX
SIGNAL
ID./CH.
DC IN
LED indicator of Wireless TX
* LED indicator - "BLUE"
The main set is turned on, everthing is connected
and transmitting.
* LED indicator - "OFF (No display)"
The main set is turned off.
Wireless RX
LED indicator of Wireless RX
* LED indicator - "BLUE"
The Wireless RX is receiving a signal of Wireless TX.
* LED indicator - "RED"
The Wireless RX is in standby mode.
10
DC IN connector
ID/CHANNEL (ID./CH.)
button
SOUND SIGNAL
connector
LED indicator
Displays the operating
status.
LED indicator
Displays the operated
status.
ID. button
Wireless speaker connector
Power cord
Assembling and Connecting to
the Speakers
The front and rear speakers are detached from the
speaker stands. Connect the speaker cords and
assemble the front and rear speakers from speaker
stands as illustrated.
1. Connect the speaker cords to the appropriate
terminals on the bottom of each front and rear
speaker.
2. Attach the front and rear speakers to the speaker
stands by rotating the screw.