Table of Contents
Advertisement
60
LG Network Client Program
Using the Remote Setup function
You can set the DVR configuration of a selected site name using this
function.
System settings
Date/Time
•
Date Format: Select the date display format.
•
Time Format: Select the time display format.
5
•
Time Zone: This option setting is not available in the client
program.
•
Daylight Saving: Mark up when you use the daylight saving
function.
•
Start Time: Select the Daylight Saving start time.
•
End Time: Select the Daylight Saving end time.
Properties
•
DVR Name: Enter the DVR name by using alphabetic letter,
numeric digit and symbols up to 21 characters.
•
Language: Select a language for the setup menu and
information display of the DVR.
•
Button Beep: Mark up to activate the button beep. The button
beep is activated when using the buttons.
•
Video format: These option settings are not available in the
client program.
•
Resolution: These option settings are not available in the client
program.
NTP
•
NTP: Mark up, if you want to synchronize the DVR's date and
time with those of the time server called NTP (Network Time
Protocol) Specify the NTP server's name.
•
Time Server: For most cases select public. The DVR will obtain
the average time among 5 public servers (time.nist.gov, time-a.
nist.gov, time-b.nist.gov, ntp.nasa.gov, clock.isc.org).
•
Private Time Server: Enter the private time server's IP address or
host name.
•
Sync. Interval: You can set synchronized intervals with the NTP
time server to 1 day, 1 hour, 1 month and 1 week.
Network
These option settings are not available in the client program except
the [Bandwith Throttle] option.
•
Bandwidth Throttle: Enter the Bandwidth to adjust the data
traffic.
DDNS
These option settings are not available in the client program.
Network Streaming
1. Click the [Setup] button to display the Network Streaming
configuration window.
•
Ch: Displays the channel number.
•
Resolution: Selects the recording resolution. Each group
such as "Ch1 to Ch8" and "Ch9 to Ch16" are set the same
resolution.
•
Quality: Selects the recording picture quality.
•
Frame Rate: Selects the frame rate. The frame rate is the
number of transportable frames per second. According to
resolution, the frame rate is set automatically. If you wish to
set manually, refer to the below.
Resolution
352*240
NTSC
704*240
704*480
352*288
PAL
704*288
704*576
2. Click the [OK] button to confirm the settings.
Controller
•
IR Remote ID: Select the IR Remote ID for this unit. If you use
multi systems set the IR Remote ID for each DVR unit.
•
Remote Controller ID: Select the Remote Controller ID for this
unit. If you use multi systems, set the Remote Controller ID for
each DVR unit. You can control the DVR by using the LKD1000
controller. (For more details refer to the LKD1000 owner's
manual.)
Device settings
Camera
•
Channel: Select the channel number.
•
Name: Enter the channel name by using alphabetic letter,
numeric digit and symbols up to 21 characters.
•
Audio: Select the input audio channel. You can hear from the
selected input audio channel. If you set to ON for the IP channel,
you can hear the input audio of the IP camera.
•
IP Enable :
On : Uses the camera as a IP camera.
Off : Uses the camera as a Analog camera.
Frame Rate
1, 3, 5, 7.5, 10, 15
1, 3, 5, 7.5
1, 3
1, 3, 5, 6, 7.5, 12.5
1, 3, 5, 6
1, 3
Advertisement
Table of Contents
