Mounting On A Table - LG 50PA4500 Owner's Manual

14
ASSEMBLING AND PREPARING

Mounting on a table

Image shown may differ from your TV.
y y
1
Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (minimum) space from the wall for
proper ventilation.
10 cm
2
Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources
y y
of heat, as this may result in fire or other
damage.
NOTE
Swivel 20 degrees to the left or right and
y y
adjust the angle of the TV to suit your
view.
CAUTION
When adjusting the angle of the product,
y y
watch out for your fingers.
10 cm
10 cm
Securing the TV to a wall (Depending on model)
Image shown may differ from your TV.
y y
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on
y y
or hang on the TV.
NOTE
Use a platform or cabinet that is strong
y y
and large enough to support the TV
securely.