48
MAKING CONNECTIONS
Daisy Chain Monitors
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
To use different products connected to each other connect one end of the signal input cable (15-pin D-Sub
Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector
of other products
Monitor 1
15-pin D-Sub Signal Cable
(Max 3 m)
RGB OUT (PC)
RGB Mode
NOTE
The number of monitors that can be connected to one output may vary depending on signal status
y
and cable loss. If the signal status is good, and there is no cable loss, it is possible to connect up to
9 monitors. If you want to connect more than this number of monitors, it is recommended to use a
distributor.
When multi-connecting in/out cascade format, no loss cables are recommended.
y
When using an HDMI - DVI conversion cable or a gender, it may not be compatible with the product
y
due to the characteristics of the signal.
Monitor 2
Monitor 3
Monitor 4