Table of Contents
Advertisement
Make sure that the flap does not cause a
blockage when you close the drawer.
10.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme.
The indicator of Mode - Wash button
illuminates.
The indicator of the Start/Pause
button flashes.
The display shows an indicative
programme duration and the maximum
load.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators illuminate on the
display and the given information
changes accordingly.
If a selection is not possible
an acoustic signal sounds
and the display shows
.
10.6 Starting a programme
Touch the Start/Pause
the programme. It is not possible to start
the programme when the indicator of the
button is off and doesn't flash (e.g. the
door is open).
The related indicator stops flashing and
stays on.
The programme starts, the door is
locked. The display shows the indicator
.
10.7 Starting a programme with
the delay start
1. Touch the Delay Start button
2. Touch the Start/Pause
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after
the countdown has started
To cancel the delay start:
1. Touch the Start/Pause
2. Touch the Delay Start button
3. Touch the Start/Pause
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Start/Pause
2. Touch the Delay Start button
button to start
3. Touch the Start/Pause
10.8 The SensiCare System
load detection
The drain pump can operate
shortly before the appliance
fills water.
repeatedly until the display shows the
desired delay time. The related
indicator comes on.
The appliance door locks and starts
the countdown of the delay start. The
display shows the indicator
pause the appliance. The related
indicator flashes.
repeatedly until the display shows .
again to start the programme
immediately.
pause the appliance. The related
indicator flashes.
repeatedly until the display shows the
desired delay time.
again to start the new countdown.
The programme duration in
the display is referred to a
medium/high load.
ENGLISH
33
button.
.
button to
button
button to
button
Advertisement
Table of Contents
