Your dealer can activate a variety of transceiver functions to
perform without any additional operation on your part.
CLOCK
If activated by your dealer, you can view the clock by pressing
the key programmed as [Clock].
Note: Removing or leaving the battery pack uncharged for
extended periods will clear the clock time.
To set the clock:
1 Press the key programmed as [Clock Adjustment].
•
The current time setting appears.
2 Press
3 Press
4 Repeat steps 2 and 3 to set the month, day, hour, and minute.
5 Press
•
You can press
VIBRATOR
When an optional vibrator is installed, the vibrator function will
alert you when an optional signaling call is received. Press the
key programmed as [Vibrator], or access the Menu {page 13},
to turn the Vibrator function ON and OFF.
TIME-OUT TIMER (TOT)
The Time-out Timer is used to prevent you from using a
channel for an extended duration. If you continuously transmit
for a preset time, the transceiver will stop transmitting and an
alert tone will sound. Release the PTT switch.
30
BACKGROUND OPERATIONS
/
to increase or decrease the year setting.
to set the year and cycle to the month setting.
to exit Clock Adjustment mode.
at any time to exit Clock Adjustment mode.