NEC PX2201UL User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Projector
  5. PX2201UL
  6. User manual
NEC PX2201UL User Manual

NEC PX2201UL User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Projector
PX2201UL
User's Manual
Please visit our web site for User's Manual in the latest version.
https://www.sharp-nec-displays.com/dl/en/pj_manual/lineup.html
Model No.
NP-PX2201UL

Advertisement

Table of Contents
loading

Related Manuals for NEC PX2201UL

Summary of Contents for NEC PX2201UL

  • Page 1 Projector PX2201UL User’s Manual Please visit our web site for User’s Manual in the latest version. https://www.sharp-nec-displays.com/dl/en/pj_manual/lineup.html Model No. NP-PX2201UL...

  • Page 2: Table Of Contents

    Table of Contents Important Information ................... v 1. Introduction ......................1 1-1. Introduction to the Projector ..................1 1-2. What’s in the Box? .......................4 1-3. Part Names of the Projector..................5 1-4. Part Names of the Remote Control ................9 Battery Installation ....................10 Remote Control Precautions ...................10 2.
  • Page 3 Table of Contents 4-3. INPUT ........................49 4-3-1. INPUT SELECTION ..................49 4-3-2. AUTO SOURCE ...................49 4-3-3. COLOR SPACE....................49 4-3-4. ASPECT RATIO ...................50 4-3-5. OVERSCAN ....................51 4-3-6. IMAGE OPTIONS ..................51 4-3-7. TEST PATTERN...................51 4-3-8. 3D .........................52 4-3-9. AUTO ADJUST.....................53 4-4. PICTURE ........................54 4-4-1.
  • Page 4 Table of Contents 5. Installation and Connections ..............71 5-1. Connecting to Other Equipment.................71 6. Maintenance .......................73 6-1. Cleaning the Lens ......................73 6-2. Cleaning the Cabinet ....................73 7. Appendix ........................ 74 7-1. Throw distance and screen size ................74 7-2. Compatible Input Signal List ..................78 7-3.
  • Page 5 • Microsoft and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • NaViSet and ProAssist are trademarks or registered trademarks of Sharp NEC Display Solutions, Ltd. in Japan, in the United State and other countries.

  • Page 6: Important Information

    AC 200–240 V Safety Cautions Precautions Please read this manual carefully before using your NEC projector and keep the manual handy for future reference. CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.
  • Page 7 Important Information Laser Safety Caution For USA This product is classified as Class 3R of IEC 60825-1 Second edition 2007-03. Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. CAUTION –...
  • Page 8 Important Information Installation • Please contact your dealer to install the projector. • Do not place the projector in the following conditions: - on an unstable cart, stand, or table. - near water, baths, or damp rooms. - in direct sunlight, near heaters, or heat radiating appliances. - in a dusty, smoky or steamy environment.
  • Page 9 Important Information • Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or screwdriver into your projector.
  • Page 10 Important Information CAUTION • Keep hands away from the lens mounting portion while performing a lens shift. Failure to do so could result in fingers being pinched by the moving lens. • Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hang- ing on the wall can cause damage to the projector.
  • Page 11 Important Information Precautions when installing or replacing the lens unit sold separately (CENTER LENS) After installation or replacement of the lens, be sure to perform [CENTER LENS] by pressing and holding the HOME button on the projector cabinet for at least two seconds. (→ page 16, 57) By carrying out [CENTER LENS], the adjustment range of the lens shift is calibrated.
  • Page 12 Important Information Label Information These labels are stuck on the below indicated positions. For USA The LASER PRODUCT in CLASS 3R conforming to IEC 60825-1 Second edition. For other regions The LASER PRODUCT in CLASS 1 conforming to IEC 60825-1 Third edition, and RG3 of IEC/EN 62471-5 First edition 2015.
  • Page 13 Important Information Label C Label D Label C: Manufacturer's ID Label Label D: Barcode label P/N...
  • Page 14 Important Information Laser light radiation range The figure below shows the maximum radiation range of the laser light. (unit: degree) Horizontal angle H Lens Zoom Tele Wide NP45ZL 22.0 28.3 NP46ZL 17.4 22.1 NP47ZL 13.9 18.2 NP48ZL 13.8 NP49ZL Vertical angle V Lens Zoom Tele...
  • Page 15 Important Information Radiation Zone (HD: Hazard Distance) • The below table describes the radiation range of emitted light by the projector that is classified as Risk Group 3 (RG3) of IEC/EN 62471-5 First edition 2015. • Please keep within bounds for installing the projector. Install a barrier for preventing human eyes from entering the RG3 zone.
  • Page 16 Important Information When projecting from above to a floor. Horizontal security zone: over 1 m (2.5 m for USA) RG3 zone Horizontal security zone: over 1 m (2.5 m for USA)
  • Page 17 Important Information CAUTION Please heed all precaution for safety. To install the projector • This projector is an RG3 product. The projector is for professional use and must be installed in location where safety is assured. For this reason, be sure to consult your dealer as installation and attachment/detachment of the lens unit must be performed by a professional service personnel.
  • Page 18 • The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by Sharp NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment.
  • Page 19 Important Information Clearance for Installing the Projector Allow ample clearance between the projector and its surroundings as shown below. The high temperature exhaust coming out of the device may be sucked into the device again. Avoid installing the projector in a place where air movement from the HVAC is directed at the projector. Heated air from the HVAC can be taken in by the projector’s intake vent.
  • Page 20 Important Information Precautions for Ceiling Installation Do not install the projector in the following places. Attached substances such as oil, chemicals and moisture may cause deformation or cracks of the cabinet, corrosion of the metal parts, or malfunction. • Outdoors and places with humid or dust •...

  • Page 21: Introduction

    1. Introduction 1-1. Introduction to the Projector This section introduces you to your new projector and describes the features and controls. General • Single-chip DLP projector with high resolution and high brightness Realized to project the image in the resolution 1920 × 1200 pixels (WUXGA), the aspect ratio in 16:10, and the brightness in 21,500 lumens.* *1 Brightness: LIGHT MODE...
  • Page 22 ProAssist is software for controlling the projector from a computer via a network. Some of the functions in ProAs- sist may not be compatible with the projector. Please visit our web site for downloading each software. URL: https://www.sharp-nec-displays.com/dl/en/index.html • CRESTRON ROOMVIEW compatibility The projector supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be man-...
  • Page 23 1. Introduction About this user’s manual The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user’s manual. This may save you time later on. At the beginning of each section of the manual you’ll find an overview.

  • Page 24: What's In The Box

    For North America For North America only Limited warranty For customers in Europe: You will find our current valid Guarantee Policy on our Web Site: https://www.sharpnecdisplays.eu/ • Important Infomation NEC Projector CD-ROM (7N8R1201) User’s manual (PDF) • Quick Setup Guide (7N8R1211) (7N953071)

  • Page 25: Part Names Of The Projector

    1. Introduction 1-3. Part Names of the Projector Front/Top The lens is sold separately. The description below is for when the NP47ZL lens is mounted. Indicator Panel Intake vent (→ page 7) Takes in air to cool the projector. (→ page xviii, 73) Intake vent Takes in air to cool the projector.
  • Page 26 1. Introduction Rear Remote Sensor Controls (→ page 11) (→ page 7) Main power switch While AC power is being Exhaust vent supplied, set the main power Heated aiir is exhausted from switch to ON position (|), then here. your projector will enter a (→...
  • Page 27 1. Introduction Controls/Indicator Panel 11 12 13 14 16 17 17. ZOOM +/− Button (POWER) Button (→ page 24, 26) (→ page 16, 29) 2. POWER Indicator (→ page 16, 29, 89) 3. STATUS Indicator (→ page 89) 4. LIGHT Indicator (→...
  • Page 28 1. Introduction Terminals Features 1. COMPUTER IN Terminal (Mini D-Sub 15 Pin) NOTE: (→ page 71) • When a remote control cable is connected to the REMOTE terminal, infrared remote control operations cannot be 2. MONITOR OUT Terminal (Mini D-Sub 15 Pin) performed.

  • Page 29: Part Names Of The Remote Control

    1. Introduction 1-4. Part Names of the Remote Control 8. ▲▼◀▶ Button 27. COMP. Button (→ page 44) (→ page 18) 9. ENTER Button 28. DVI Button (→ page 44) (→ page 18) 10. FOCUS Button 29. AUX Button (→ page 24, 25) (→...

  • Page 30: Battery Installation

    1. Introduction Battery Installation 1. Press the catch and remove the battery cover. 2. Install new ones (AAA). Ensure that you have the batteries’ polarity (+/−) aligned correctly. 3. Slip the cover back over the batteries until it snaps into place. NOTE: •...
  • Page 31 1. Introduction Operating Range for Wireless Remote Control 15° 15° 15° 15° 7 m/276 inch 7 m/276 inch Remote sensor on projector cabinet Remote control 15° 15° 15° 15° 7 m/276 inch 7 m/276 inch • The infrared signal operates by line-of-sight up to a distance of above meters and within a 60-degree angle of the remote sensor on the projector cabinet.

  • Page 32: Projecting An Image (Basic Operation)

    2. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. 2-1. Flow of Projecting an Image Step 1 • Connecting your computer / Connecting the power cord (→ page 13) Step 2 •...

  • Page 33: Connecting Your Computer/Connecting The Power Cord

    2. Projecting an Image (Basic Operation) 2-2. Connecting Your Computer/Connecting the Power Cord 1. Connect your computer to the projector. This section will show you a basic connection to a computer. For information about other connections, see “5-1. Connecting to Other Equipment” on page 71. Connect the HDMI output terminal of the computer to the HDMI 1 IN or HDMI 2 IN input terminal of the unit.
  • Page 34 2. Projecting an Image (Basic Operation) CAUTION Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the AC power supply is disconnected during normal projector operation. Use caution when picking up the projector. Using the Supplied Power Cords Select the power cord suitable for your country or region.

  • Page 35: Turning On The Projector

    2. Projecting an Image (Basic Operation) 2-3. Turning on the Projector NOTE: • The projector has two power switches: A main power switch and a POWER button (POWER ON and POWER ON on the remote control) • Turning on the projector: 1.
  • Page 36 2. Projecting an Image (Basic Operation) 3. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control. WARNING The projector produces a strong light. When turning on the power, operate from the side or rear of the projector (outside the Restriction Zone (HD)).
  • Page 37 2. Projecting an Image (Basic Operation) About the language of the on-screen menu When you turn on the power for the first time after purchase, the on-screen menu is displayed in English. The display language of the on-screen menu can be changed by selecting [SETUP] → [LANGUAGE] on the on-screen menu. NOTE: •...

  • Page 38: Selecting A Source

    2. Projecting an Image (Basic Operation) 2-4. Selecting a Source Selecting the computer or video source NOTE: • Turn on the computer or video source equipment connected to the projector. Using the Direct button on the remote control Press the Direct button on the remote control. Select the input according to the connection terminal.

  • Page 39: Using The Input Button On The Projector Cabinet

    2. Projecting an Image (Basic Operation) Using the INPUT button on the projector cabinet Pressing the INPUT button will switch to the next input source. HDMI 1 → HDMI 2 → COMPUTER → BNC → DVI-D → DisplayPort → SDI → HDBaseT…… Select by displaying the On-Screen Menu 1.

  • Page 40: Adjusting The Picture Size And Position

    2. Projecting an Image (Basic Operation) 2-5. Adjusting the Picture Size and Position In this chapter drawings and cables are omitted for clarity. Adjusting the projected image’s vertical and horizontal Adjusting the focus position [Focus] [Lens shift] (→ page 24, 25) (→...

  • Page 41: Adjusting The Vertical Position Of A Projected Image (Lens Shift)

    2. Projecting an Image (Basic Operation) Adjusting the vertical position of a projected image (Lens shift) CAUTION • Perform the adjustment from behind or from the side of the projector. If adjustments are performed from the front, your eyes could be exposed to strong light and get injured. •...
  • Page 42 2. Projecting an Image (Basic Operation) Adjusting with the remote control 1. Press the SHIFT button. The [LENS CONTROL] screen will be displayed. 2. Press the ▼▲◀ or ▶ button. Use the ▼▲◀▶ buttons to move the projected image. NOTE: About [CENTER LENS] If the power of the projector is wrongly shut down during the motion of lens shift, it may shift the home position of the lens and may cause of malfunction.

  • Page 43: Adjusting The Focus And Zoom Of The Projected Image

    2. Projecting an Image (Basic Operation) Adjusting the focus and zoom of the projected image Adjust the focus and size of the projected image. The adjustment procedure differs depending on the lens unit that you are using. Recommend to perform the focus adjustment after leaving the projector under the state the TEST PATTERN has been projected for over 30 minutes.
  • Page 44 2. Projecting an Image (Basic Operation) Applicable lens: NP48ZL/NP49ZL 1. Adjust the focus until the image is clear. Adjusting with buttons on the cabinet Adjusting with the remote control Use the FOCUS (+) or (−) button on the projector ① Press the FOCUS button or the cabinet.
  • Page 45 2. Projecting an Image (Basic Operation) Applicable lens: NP45ZL/NP46ZL/NP47ZL The lens unit NP45ZL, NP46ZL, or NP47ZL allows you to manually adjust the edge focus in addition to the electric focus. Edge focus position for each lens unit NP45ZL NP46ZL NP47ZL Edge focus ring Edge focus ring Edge focus ring...
  • Page 46 2. Projecting an Image (Basic Operation) * With the lens shift in the center position the optical axis is at the center of the image. In this case, adjust the focus at the center of the projected image. 2. Adjust the zoom until the projected image fits the screen. Adjusting with buttons on the cabinet Adjusting with the remote control Press the ▲/▼...
  • Page 47 2. Projecting an Image (Basic Operation) 4. Adjust the focus at the edges of the projected image. (Manual focus) Turn the edge focus ring clockwise or counterclockwise. In this case the focus near the optical axis adjusted in the step 1 and step 3 will not be changed. Optical axis...

  • Page 48: Adjusting The Tilt Foot

    2. Projecting an Image (Basic Operation) Adjusting the Tilt Foot 1. The position to project image may be adjusted by the tilt foot positioned at four corners of the cabinet bottom. The tilt foot height can be adjusted by its turn. “To adjust the height of the projected image”...

  • Page 49: Turning Off The Projector

    2. Projecting an Image (Basic Operation) 2-6. Turning off the Projector 1. Press the (POWER) button on the projector cabinet or the POWER STANDBY button on the remote control. The [POWER OFF] message will appear. Power On Standby 2. Press the (POWER) button again.

  • Page 50: Convenient Features

    3. Convenient Features 3-1. Turn off the light of the projector (LENS SHUTTER) Press the SHUTTER button. The light source will turn off temporarily. Press again to allow the screen to become illuminated again. • Press the SHUTTER CLOSE ( ) button on the remote control.

  • Page 51: Shift The On-Screen Menu Displaying Position

    3. Convenient Features 3-3. Shift the On-Screen Menu displaying position 1. Press the MENU button. The On-Screen Menu will be displayed on. 2. Move the cursor by the ▶ button to the [SETUP]. 3. Move the cursor by the ▼ or ▲ button to the [MENU] and then press the ENTER or ▶ button. 4.

  • Page 52: Magnifying A Picture

    3. Convenient Features 3-4. Magnifying a Picture You can magnify the picture up to two times. NOTE: • Depending on an input signal, the maximum magnification may be less than two times, or the function may be restricted. To do so: 1.

  • Page 53: Adjustment Of Luminance (Brightness) And Energy-Saving Effect [Light Mode]

    3. Convenient Features 3-5. Adjustment of luminance (brightness) and energy-saving effect [LIGHT MODE] The brightness of the projector can be adjusted within a range of 30 to 100% (in 1% increments) and maintained at a constant level after adjusting. In addition, when you set the [LIGHT MODE] to [ECO], the brightness decreases and the operating sound gets quieter.

  • Page 54: Correcting Horizontal And Vertical Keystone Distortion [Keystone]

    3. Convenient Features 3-6. Correcting Horizontal and Vertical Keystone Distortion [KEYSTONE] Use the [KEYSTONE] feature to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right side of the screen longer or shorter so that the projected image is rectangular. 1.

  • Page 55: Controlling The Projector By Using An Http Browser

    3. Convenient Features 3-7. Controlling the Projector by Using an HTTP Browser Overview Using the web browser on the computer, the HTTP server screen of the projector can be displayed to operate the projector. Possible operations on the HTTP server screen •...
  • Page 56 IP address of the projector has been set in the “HOSTS” file of the computer being used. Example 1: When the host name of the projector has been set to “pj.nec.co.jp”, access is gained to the network setting by specifying http://pj.nec.co.jp/index.html...

  • Page 57: Storing Changes For Lens Shift [Lens Memory]

    3. Convenient Features 3-8. Storing Changes for Lens Shift [LENS MEMORY] Stores the projection position (lens shift) on the screen in the projector’s memory. A maximum of 10 values can be stored. When you recall the stored [LENS MEMORY], the lens shift will automatically move at the adjustment value to move the position of the projection screen.

  • Page 58: Adjust Boundaries Of A Projected Image [Edge Blending]

    3. Convenient Features 3-9. Adjust boundaries of a projected image [EDGE BLENDING] This projector is equipped with an “EDGE BLENDING Function” that makes the edges (boundaries) of the projection screen indistinguishable. NOTE: • Before performing the EDGE BLENDING function, place the projector in the correct position so that the image becomes square in the appropriate size, and then make optical adjustments (lens shift, focus, and zoom).
  • Page 59 3. Convenient Features Setting the overlap of projection screens ① Enable [EDGE BLENDING]. 1. Press the MENU button. The menu will be displayed. 2. Select [DISPLAY] → [EDGE BLENDING]. The [EDGE BLENDING] screen will be displayed. Align the cursor with [MODE] and then press the ENTER but- ton.
  • Page 60 3. Convenient Features • Select [TOP], [BOTTOM], [LEFT], [RIGHT] after selecting [RANGE] or [BLACK LEVEL]. TOP: OFF TOP: OFF LEFT: OFF RIGHT: ON LEFT: ON RIGHT: OFF BOTTOM: ON BOTTOM: ON TOP: ON TOP: ON LEFT: OFF RIGHT: ON LEFT: ON RIGHT: OFF BOTTOM: OFF BOTTOM: OFF...
  • Page 61 3. Convenient Features ② Adjust [RANGE] to determine an area of overlapped edges of images projected from each projector. When [MARKER] is set to [ON], markers of two colors are displayed on the screen according to the setting of [RANGE]. The red marker represent the edges of the region where images overlap, the green marker represent the range of overlapping (region/width).
  • Page 62 3. Convenient Features Black Level Adjustment This adjusts the black level of the overlapping area and the non-overlapping area of the multi-screen (EDGE BLENDING). Adjust the brightness level if you feel the difference is too large. NOTE: • Adjustable area varies depending on what combination of [TOP], [BOTTOM], [LEFT] and [RIGHT] in the [RANGE] or [BLACK LEVEL] are turned on.
  • Page 63 3. Convenient Features TIP: 9-segmented portions for Black Level adjustment The black level of the center projector is adjusted as shown in the figure. RIGHT LEFT BOTTOM TIP: • The edge blending width is the width set in the range. •...

  • Page 64: Using On-Screen Menu

    4. Using On-Screen Menu 4-1. Basic operations of the on-screen menu Display the on-screen menu to adjust the quality of the image projected by the projector and to switch the operation mode of the projector. Hereinafter, “on-screen menu” will be abbreviated to “menu”. NOTE: •...

  • Page 65: Adjustment Bar

    4. Using On-Screen Menu 4-1-2. Adjustment bar To change the value on the adjustment bar, press the ◀/▶ button. When you press the ◀/▶ button, the menu screen disappears and an adjustment bar is displayed at the bottom of the screen. Press the ◀/▶...

  • Page 66: List Of Menu Items

    4. Using On-Screen Menu 4-2. List of Menu Items Some menu items are not available depending on the input source. TOP MENU SUB MENU FACTORY DEFAULT SELECTIONS HDMI 1 / HDMI 2 / COMPUTER / BNC / INPUT SELECTION HDMI 1 DVI-D / DisplayPort / SDI / HDBaseT AUTO SOURCE OFF / ON...
  • Page 67 4. Using On-Screen Menu TOP MENU SUB MENU FACTORY DEFAULT SELECTIONS LENS LOCK OFF / ON ZOOM LENS CONTROL FOCUS SHIFT MEMORY 1 STORE / LOAD / RESET MEMORY 2 STORE / LOAD / RESET MEMORY 3 STORE / LOAD / RESET MEMORY 4 STORE / LOAD / RESET MEMORY 5...
  • Page 68 4. Using On-Screen Menu TOP MENU SUB MENU FACTORY DEFAULT SELECTIONS ENGLISH / DEUTSCH / FRANCAIS / ITALIANO / ESPAÑOL / SVENSKA / LANGUAGE ENGLISH РУССКИЙ / 日本語 / PORTUGUÊS / 简体 中文 / 繁體中文 / 한국어 DESKTOP FRONT / CEILING REAR / ORIENTATION DESKTOP FRONT DESKTOP REAR / CEILING FRONT...

  • Page 69: Input

    4. Using On-Screen Menu 4-3. INPUT 4-3-1. INPUT SELECTION Select the input terminal to project. A “ • ” (dot) will appear in the selected input terminal. HDMI 1 Projects the image of the device connected to the HDMI 1 IN input terminal. HDMI 2 Projects the image of the device connected to the HDMI 2 IN input terminal.

  • Page 70: Aspect Ratio

    4. Using On-Screen Menu 4-3-4. ASPECT RATIO Select the aspect ratio of the screen. Projects the picture in 5:4 aspect ratio Projects the picture in 4:3 aspect ratio. 16:10 Projects the picture in 16:10 aspect ratio 16:9 Projects the picture in 16:9 aspect ratio 1.88 Projects the picture in 1.88:1 (vista) aspect ratio 2.35...

  • Page 71: Overscan

    4. Using On-Screen Menu 4-3-5. OVERSCAN Set overscan (process to cut the frame around the screen). Overscan will not be performed. CROP Projects the image with the surroundings hidden. ZOOM Enlarges the image to fit the projection screen. Projected image Overscaned by 10% 4-3-6.
  • Page 72 4. Using On-Screen Menu 4-3-8. 3D Set this to projecting 3Dimages with the projector. FORMAT Select the 3D video format (recording/transmission method). Select the format according to the 3D broadcast and 3D media. Normally select [AUTO]. If the 3D detection signal of the format cannot be determined, select the format of the 3D input signal.

  • Page 73: Auto Adjust

    4. Using On-Screen Menu 4-3-9. AUTO ADJUST When executed, the projected screen is automatically adjusted. • Automatic adjustment can also be performed by pressing the AUTO ADJUST button on the projector. NOTE: • If the screen is distorted even after performing automatic adjustment, adjust the image with [IMAGE OPTIONS].

  • Page 74: Picture

    4. Using On-Screen Menu 4-4. PICTURE 4-4-1. PRESET Select the optimal settings for the projected picture. HIGH-BRIGHT Use this setting when projecting in a bright room. PRESENTATION Use this setting when making a presentation with PowerPoint etc. VIDEO Use this setting when projecting TV programs or general video sources. 4-4-2.

  • Page 75: White Balance

    4. Using On-Screen Menu 4-4-6. WHITE BALANCE Adjust the white level and black level of the signal to achieve the best color reproduction. CONTRAST R Adjusts the white color of the picture. CONTRAST G CONTRAST B BRIGHTNESS R Adjusts the black color of the picture. BRIGHTNESS G BRIGHTNESS B NOTE:...

  • Page 76: Noise Reduction

    4. Using On-Screen Menu MAGENTA Adjusts the color near the area centered around magenta. Move in the “+” direction to make the color appear more red and move in the “−” direction to make the color more blue. SATURATION Adjusts the intensity of the magenta color. Move in the “+”...

  • Page 77: Display

    4. Using On-Screen Menu 4-5. DISPLAY 4-5-1. LENS LOCK Disables the use of the ZOOM/FOCUS adjustment, lens shift and [CENTER LENS] functions. By performing [LENS LOCK], it is possible to prevent other people from adjusting the lens without permission after the lens has been adjusted.

  • Page 78: Digital Zoom

    4. Using On-Screen Menu 4-5-5. DIGITAL ZOOM Enlarge the screen up to a maximum of 2 times. • Digital zoom can also be performed by holding the CTL button and pressing the VOL/D-ZOOM + button on the remote control. DIGITAL ZOOM Enlarges the screen by up to 2 times.
  • Page 79 4. Using On-Screen Menu ROTATION Rotates the screen within the display area. As the angle of rotation increases, the screen becomes smaller. ROTATION -100 (-25°) 100 (25°) RESET Returns the rotation adjustment value to the factory setting. PINCUSHION / BARREL Adjust this when projecting onto a cylindrical screen or spherical surface.
  • Page 80 4. Using On-Screen Menu Adjusts the barrel-shaped distortion for each of the 4 sides. -150 (-30%) 150 (30%) BOTTOM -150 (-30%) 150 (30%) LEFT -150 (-30%) 150 (30%) RIGHT -150 (-30%) 150 (30%) RESET Resets the [ARC] adjustment value to the factory setting. TOP LEFT CORNER Adjusts the top left corner distortion.
  • Page 81 4. Using On-Screen Menu TOP RIGHT CORNER Adjusts the top right corner distortion. HORIZONTAL -192 (Pixels) 192 (Pixels) VERTICAL -120 (Pixels) 120 (Pixels) RESET Returns the adjustment value to the factory setting. BOTTOM LEFT CORNER Adjusts the bottom left corner distortion. HORIZONTAL -192 (Pixels) 192 (Pixels)

  • Page 82: Blanking

    4. Using On-Screen Menu PC TOOL Recall the geometric correction data that is registered in the projector beforehand. Three types of correction data can be registered. 4-5-7. BLANKING Adjusts the display range (BLANKING) of the top, bottom, left, and right edges of the video signal. 4-5-8.

  • Page 83: Setup

    4. Using On-Screen Menu 4-6. SETUP 4-6-1. LANGUAGE Select the language to be displayed in the menu. NOTE: • [LANGUAGE] will not be changed even if [RESET ALL] is performed. 4-6-2. ORIENTATION Select the orientation according to the installation status of the projector and screen. WARNING •...

  • Page 84: Fan Mode

    4. Using On-Screen Menu 4-6-3. FAN MODE Set the cooling fan operation to lower the temperature inside the projector. AUTO Turns the fan at an appropriate speed using the temperature sensor and pressure sensor inside the projector. The fan rotation is quiet. HIGH ALTITUDE Select this option when using the projector in a low pressure area e.g.

  • Page 85: Network Settings

    4. Using On-Screen Menu 4-6-6. NETWORK SETTINGS Configure the network settings of the projector. NOTE: • [NETWORK SETTINGS] will not be changed even if [RESET ALL] is performed. NETWORK MODE Always select [LAN1]. [LAN2] is used for servicing. STANDBY POWER When [ON] is selected, you can exercise control via a wired LAN even when the projector is in standby mode.

  • Page 86: Light Mode

    [CONSTANT BRIGHTNESS] to [ON]. 4-6-10. BACKGROUND Select the background color when there is no input signal. You can select either blue, black, or the NEC logo. NOTE: • [BACKGROUND] will not be changed even if [RESET ALL] is performed.

  • Page 87: Startup Logo

    4. Using On-Screen Menu 4-6-11. STARTUP LOGO Select whether or not to display the NEC logo on the screen during startup. NOTE: • [STARTUP LOGO] will not be changed even if [RESET ALL] is performed. 4-6-12. REMOTE CONTROL Configure the remote sensor setting and control ID.
  • Page 88 4. Using On-Screen Menu How to set/change the ID in the remote control 1. Turn on the power of the projector. 2. Press the ISD SET button on the remote control. The [CONTROL ID] screen will be displayed. At this point, [ACTIVE] is displayed if the projector can be operated with the current remote control ID, and a [INACTIVE] screen is displayed if it cannot be operated.

  • Page 89: Trigger-1/2

    4. Using On-Screen Menu 4-6-13. TRIGGER-1/2 Set whether to output the control voltage for screen control from the screen trigger terminal according to the input video signal. 4-6-14. MENU MENU POSITION Changes the position to display the menu. You can choose from 5 locations. MENU TRANSLUCENT Select the menu transparency.

  • Page 90: Info. And Reset All

    4. Using On-Screen Menu 4-7. INFO. And RESET ALL 4-7-1. INFO. MODEL NO. Displays the model name. SERIAL NUMBER Displays the serial number. FIRMWARE Displays the firmware version number of the main CPU. LANCPU Displays the firmware version number of the network CPU. SUB-CPU Displays the firmware version number of the sub CPU.

  • Page 91: Installation And Connections

    5. Installation and Connections 5-1. Connecting to Other Equipment Below is an example of connections to external equipment. No connection cables are included with this projector. Use the appropriate cables for the connections. CAUTION • Be sure to turn off the projector before connecting the projector to an external device. In doing so, do not enter the radiation zone (HD).
  • Page 92 5. Installation and Connections ① HDMI cable (not supplied) • Use a certified High Speed HDMI Cable or High Speed HDMI Cable with Ethernet. ® ® • When connecting the HDMI 1 IN or HDMI 2 IN connector of the projector to the Blu-ray player, the projector's video level can be made settings in accordance with the Blu-ray player's video level.

  • Page 93: Maintenance

    6. Maintenance WARNING • Turn off the projector, and unplug the projector before cleaning. • Please do not use a spray containing flammable gas to remove dust attached to the lens or the cabinet, etc. Doing so may result in fires. 6-1.

  • Page 94: Appendix

    7. Appendix 7-1. Throw distance and screen size This projector can be used with 5 kinds of optional lenses (sold separately). Refer to the information on this page and use a lens suited for the installation environment (screen size and throw distance). Request the dealer to attach or detach the lens unit.
  • Page 95 7. Appendix Projection range for the different lenses NP48ZL: 87"–1016"/2.2–25.8 m NP46ZL: 51"–398"/1.3–10.1 m 50–300" 50–300" 50–300" 50–300" 50–300" NP45ZL: 39"–307"/1.0–7.8 m NP47ZL: 63"–508"/1.6–12.9 m NP49ZL: 169"–1780"/4.3–45.2 m...
  • Page 96 7. Appendix Tables of screen sizes and dimensions Size Screen width Screen height (inches) (cm) (inches) (cm) (inches) (cm) 16:10 screen size 127.0 42.4 107.7 26.5 67.3 Screen (diagonal) 177.8 59.4 150.8 37.1 94.2 height 254.0 84.8 215.4 53.0 134.6 304.8 101.8 258.5...
  • Page 97 7. Appendix Lens shifting range This projector is equipped with a lens shift function for adjusting the position of the projected image by using the LENS SHIFT buttons (→ page 21). The lens can be shifted within the range shown below. NOTE: •...

  • Page 98: Compatible Input Signal List

    7. Appendix 7-2. Compatible Input Signal List Analog RGB Signal Resolution ( dots ) Aspect Ratio Refresh Rate ( Hz ) 640 × 480 4 : 3 60/75/85/iMac SVGA 800 × 600 4 : 3 60/75/85 1024 × 768 4 : 3 60/70/75/85/iMac XGA+ 1152 ×...
  • Page 99 7. Appendix Signal Resolution ( dots ) Aspect Ratio Refresh Rate ( Hz ) HDTV (1080p) 1920 × 1080 16 : 9 50/60 HDTV (1080i) 1920 × 1080 16 : 9 50/60 HDTV (720p) 1280 × 720 16 : 9 50/60 SDTV (480i/p) 720 ×...

  • Page 100: Specifications

    7. Appendix 7-3. Specifications Model name NP-PX2201UL Method Single DLP chip ® Specifications of main parts DMD panel Size 0.96" (24.4 mm) (aspect ratio: 16:10) Pixels 2,304,000 (1920 dots × 1200 lines) (*1) Projection lenses Please refer to the specifications of option lens (→ page 82)
  • Page 101 7. Appendix Model name NP-PX2201UL External dimensions 20.9" (width) × 9.8" (height) × 29.3" (depth)/530 (width) × 248 (height) × 745 (depth) mm (not including protruding parts) 20.9" (width) × 10.8" (height) × 29.4" (depth)/530 (width) × 274.5 (height) × 748...
  • Page 102 7. Appendix Option lens (sold separately) NP45ZL Power zoom and focus throw ratio 0.9–1.2:1, F2.2–2.53, f = 19.34–25.76 mm NP46ZL Power zoom and focus throw ratio 1.2–1.56:1, F2.18–2.66, f = 25.69–33.22 mm NP47ZL Power zoom and focus throw ratio 1.5–2.0:1, F2.17–2.65, f = 31.90–42.20 mm NP48ZL Power zoom and focus throw ratio 2.0–4.0:1, F2.17–2.64, f = 42.60–84.80 mm...

  • Page 103: Cabinet Dimensions

    7. Appendix 7-4. Cabinet Dimensions Unit: mm (inch) Lens center 530 (20.9) 6-M6 × L16 (Max) for Ceiling Mount* * The screws specifications for Ceiling Mount: Screw type: M6 Screw hole dimension on the projector: M6 with the maximum depth 16 mm (0.63") 155 (6.1) 375 (14.8) CAUTION...

  • Page 104: Pin Assignments And Signal Names Of Main Terminals

    7. Appendix 7-5. Pin assignments and signal names of main terminals HDMI 1 IN/HDMI 2 IN Terminal (Type A) Pin No. Signal Pin No. Signal TMDS Data 2+ TMDS Clock Shield 2 4 6 8 10 12 14 16 18 1 3 5 7 9 11 13 15 17 19 TMDS Data 2 Shield TMDS Clock−...
  • Page 105 7. Appendix HDBaseT/LAN Port (RJ-45) Pin No. Signal TxD+/HDBT0+ 1 2 3 4 5 6 7 8 TxD−/HDBT0− RxD+/HDBT1+ Disconnection/HDBT2+ Disconnection/HDBT2− RxD−/HDBT1− Disconnection/HDBT3+ Disconnection/HDBT3− PC CONTROL Port (D-Sub 9 Pin) Pin No. Signal Unused TxD transmission data RxD reception data Unused Grounding Unused...
  • Page 106 7. Appendix Screen Trigger (Stereo mini) When the projector is powered ON the screen trigger output sends a low voltage trigger to the screen controller and the screen will go down. When the projector is powered OFF the screen trigger stops sending a low voltage trigger to the screen controller and the screen will go up.

  • Page 107: Troubleshooting

    7. Appendix 7-6. Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Problem Check These Items Does not turn on or • Check that the power cord is plugged in and that the power button on the projector cabinet or the remote shut down control is on.
  • Page 108 “Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections.

  • Page 109: Feature Of Each Indicator

    7. Appendix 7-7. Feature of each indicator ① POWER indicator This indicator informs the power status of the projector. ② STATUS indicator This indicator lights/blinks when a button is pressed while the [CONTROL PANEL LOCK] function is utilized, or while performing the [CENTER LENS] and specific operations.
  • Page 110 7. Appendix POWER STATUS LIGHT TEMP. Projector status Procedure A button has been pressed The [CONTROL PANEL while the [CONTROL PANEL LOCK] is activated. The Blue Orange Status varies LOCK] is activated. setting must be canceled to (Light) (Light) operate the projector. (→ page 69) ID numbers for the projector Check the control IDs (→...

  • Page 111: Pc Control Codes And Cable Connection

    7. Appendix 7-8. PC Control Codes and Cable Connection PC Control Codes Function Code Data POWER ON POWER OFF INPUT SELECT HDMI 1 INPUT SELECT HDMI 2 INPUT SELECT COMPUTER INPUT SELECT BNC INPUT SELECT DVI-D INPUT SELECT DisplayPort INPUT SELECT SDI INPUT SELECT HDBaseT NOTE: •...

  • Page 112: Troubleshooting Check List

    7. Appendix 7-9. Troubleshooting Check List Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem more efficiently.
  • Page 113 Native resolution: Projector Refresh rate: Video adapter: Blu-ray player Other: Signal cable Video equipment NEC standard or other manufacturer’s cable? Model number: Length: inch/m VCR, Blu-ray player, Video camera, Video game or other Distribution amplifier Manufacturer: Model number: Model number:...
  • Page 114 © Sharp NEC Display Solutions, Ltd. 2022 7N953071...

This manual is also suitable for:

Np-px2201ul

Table of Contents