Initial Configuration And Operation; Before Using The System - LG Ipsolute LW130W-D Owner's Manual

Initial Configuration and Operation

Before Using the System

• Before you use LG IP device, check the connection cables
and power supply of the device.
• Make sure LG IP device is connected to the network and
each of the system components are powered up.
• To connect to a PC, you need to install LG Client software
on the machine first. Once you connect the PC with an LG
IP device, the Smart Web Viewer Software automatically
starts the installation procedure. LG IPSOLUTE and LG
Smart Web Viewer software are the network software that
is used in controlling the LG Network Video Server and LG
IP Cameras.
22
• To view the video stream on a web browser, you first need
to allow the installation of the Active X controls in the
settings menu of your web browser.
Once you see the installation warning message of 'IPCam_
Streamer.cab distributed by LG ELECTRONICS.IN, ' click on
the yellow bar on the upper margin of your web browser's
screen to install LG Smart Web Viewer Software (which is
an Active X control.) Set the browser zoom level to 100%.
• The images displayed on your screen may differ in
accordance with the different types of OS or web browser
you use.
• Do not run the client program with other software, which
may cause errors or excessive memory consumption.