Usb Connection; Optical In Connection; Home Theater Speaker Ez Setup - LG LHD645B Owner's Manual

20 Connecting

USB Connection

Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
2
,
Note
Removing the USB Device from the unit.
1. Choose a different function mode or press
Z STOP twice in a row.
2. Remove the USB device from the unit.
Compatible USB Devices
y MP3 Player : Flash type MP3 player.
y USB Flash Drive : Devices that support USB2.0 or
y The USB function of this unit does not support
some USB devices.
USB device requirement
y Devices which require additional program
installation connected to a computer, are not
supported.
y Do not extract the USB device while in operation.
y For a large capacity USB, it may take longer than
a few minute to be searched.
y To prevent data loss, back up all data.
y If you use a USB extension cable or USB hub, the
USB device is not recognized.
y Using NTFS file system is not supported. (Only
FAT(16/32) file system is supported.)
y This unit is not supported when the total
number of files is 1000 or more.
y External HDD, Card readers, Locked devices,
or hard type usb devices are not supported.
y USB port of the unit cannot be connected to PC.
The unit can not be used as a storage device.
y Some USB may not work with this unit.
USB1.1.

OPTICAL IN connection

Connect an optical output of Unit (or Digital Device
etc) to the OPTICAL IN connector.
To the digital
optical output jack
of your component
Home theater speaker ez
setup
Listen to sound from TV, DVD and Digital Device
with 5.1(2.1 or 2)ch mode. Even in power off
mode, if you press OPTICAL, then power is on and
automatically changed to AUX OPT mode.
1. Connect the unit's OPTICAL IN jack to jack on
optical out of your TV (or Digital Device etc.).
2. Select the AUX OPT by using the OPTICAL
on the remote control to select the AUX OPT
directly.
Or
To select the AUX OPT function, press INPUT on
the remote control.
3. Listen sound with 5.1(2.1 or 2)ch speaker.
4. To escape from AUX OPT by using the OPTICAL.
Function is retuned to previous one.