Table of Contents
Advertisement
Auto off function
As a factory default, this unit will turn to standby mode automatically if
there is no sound and it is not being used for approximately 20 minutes.
To cancel this function
1
Touch and hold [DISP] and [6] for at least 4 seconds.
2
Touch [VOL –] or [VOL +] to select "OFF".
3
Touch [DISP] to confirm the setting.
≥ To turn the function on, select "On" in step 2.
≥ About one minute before the unit turns off by this function, "A_OFF" is
displayed. Touch any switch to cancel it.
≥ When connected to a Bluetooth
≥ This setting cannot be selected when network standby is on. If network
standby is set to on, this function will also be set to "On". To change the setting,
set the network standby to "OFF". (l 16)
device, the function does not work.
®
- 42 -
Advertisement
Table of Contents
