Miele ProLine Tepan Yaki Operating And Installation Instructions page 8

Table of Contents

Advertisement

IMPORTANT SAFETY INSTRUCTIONS
During installation, maintenance, and repair work, the Tepan Yaki
must be completely disconnected from the domestic electrical sup-
ply. It is only completely isolated from the supply when:
- The breakers have been switched off.
- The screw-out breakers have been completely removed.
- The electrical plug (if present) is removed from the socket. To do
this, pull the plug, not the power cord.
Danger of electric shock.
Do not use the Tepan Yaki if it is damaged or if it suffers damage
during use. Switch it off immediately. Disconnect the Tepan Yaki
from the domestic electrical supply. Contact Customer Service.
If the Tepan Yaki is built in behind a cabinet front (e.g., a door), do
not close the door while the Tepan Yaki is in use. Heat and moisture
can build up behind the cabinet front when closed. This can result in
damage to the Tepan Yaki, the housing unit, and the floor. Do not
close the cabinet front until the residual-heat indicators go out.
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs 1327

Table of Contents