Changing the jets
Disconnect the gas cooktop from
the electricity supply by switching
off at the socket and withdrawing the
plug or by disconnecting the mains
fuse. Turn off the gas supply.
To change the jets, the burner securing
screws must first be loosened and the
upper section of the appliance
removed.
To change the main jet
^ Remove burner caps op, burner
ring q and burner head r.
^ Pull the control knob off.
^ Loosen screws w, and remove the
upper section of the appliance.
Conversion to another type of gas
^ Remove the top from the cooktop
carefully. Make sure the in-operation
and residual heat indicator module
a, which is located beneath the
cooktop isn't detached during this
process. To release the residual heat
module press both snap-in hooks b
inwards.
^ Whilst counterholding it in place with
an SW 13 spanner, unscrew the main
jet anti-clockwise from its housing
using an SW 10 spanner (see
illustration).
^ Screw in the new main jet, once
again using the spanner to
counterhold the jet housing.
43