INSTALLATION
Air Flow Separator Installation
Air Flow Separator Installation
The installation of the air flow separator is the same process for both the vertical and horizontal orientation, only the separator itself changes.
Step 1:
Figure 13: Vertical or Horizontal (Step 1).
Remove one of the filters exposing the economizer. See Figure 13.
Vertical Orientation
Horizontal Orientation
Step 2:
Figure 14: Vertical Separator (Step 2).
Figure 15: Horizontal Separator Step 2).
If you are using the economizer in the vertical orientation
use the separator shown in Figure 14, otherwise use the
separator shown in Figure 15 for the horizontal orientation.
Once which separator required has been chosen, attach
the black bulb gasket on to the edge opposite of the pilot
holes. If necessary, trim the bulb gasket to length.
Due to our policy of continuous product innovation, some specifications may change without notification.
13
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.