Packaging The Health Buddy - Bosch Health Buddy 3 Service Manual

Procedure
To update the ROM of the Health Buddy:
1. Power up the Health Buddy by plugging one end of the power supply into an electrical
outlet and the other end into the back of the Health Buddy.
2. Plug the HB3 Utility Key into a USB port on the back of the Health Buddy. (If you do
not have an HB3 Utility Key, see
3. When the Health Buddy prompts you to select a utility to run, select Update ROM,
and then follow the instructions on the Health Buddy. The Health Buddy will tell you if
the Update ROM program is successfully completed. (The text in the picture below
might not exactly match what you see. The term "firmware" means the same as
"ROM.")
4. When the ROM Update program is completed, unplug the Health Buddy from the
power supply and remove the HB3 Utility Key from the Health Buddy.
The ROM of the Health Buddy is now updated to the latest version.

10. Packaging the Health Buddy

When the Health Buddy is ready to be transferred to a new patient, package it in preparation
for shipping.
Note: The following photos show the United States version of the Health Buddy packaging.
The European version might look slightly different.
Creating a Health Buddy 3 Utility Key.)