Page 13
856-180423-001-00 Keep this manual carefully along with the product N8106-010 VMware ESXi support kit User’s Guide The User's Guide is intended to allow you to install and use the VMware ESXi support kit N8106-010 correctly and safely. Read this manual thoroughly before handling the Kit. In addition, refer to this guide whenever you want to know how to use the Kit or some malfunction occurs.
856-180423-001-00 Notes On Use Please be sure to protect the following notes after picking out this product from a box. Do not use the server in the place where dust, water or liquid may pour. Do not use the server in the place where the strong electromagnetic waves generate ...
Page 15
856-180423-001-00 Introduction This VMware ESXi support kit is that used on Express5800/E120f-M. Composition article This kit including the following parts, please check it. Name Quantity Comment USB-DOM(4GB) USB extend cable USB-DOM holder VMware ESXi support Kit User’s Guide This book. - 15 -...
Page 16
856-180423-001-00 Installing the VMware ESXi support kit This product contains electronic components sensitive to static electricity. Avoid failures caused by static electricity when installing or removing any optional devices. 1.Preparation point to be checked You need to remove server module from rack when installing the VMware ESXi support kit : 1.
Page 17
856-180423-001-00 2.Install the VMware ESXi support kit ■ Installation place of VMware ESXi support kit 【Left server module】 【Right server module】 You must avoid static electricity to work with the procedure below. For details, Important refer to Express5800/E120f-M User’s Guide Chapter 2 (1.2 Anti-static Measures). - 17 -...
Page 18
856-180423-001-00 1. Connect the USB-DOM to a USB extend cable and then install into a USB-DOM holder. Keep so that a lid of removed USB-DOM isn't lost. Important - 18 -...
Page 19
856-180423-001-00 2. Push the USB-DOM straight into the server module. Server Module (Front) Installation place of USB-DOM - 19 -...
Page 20
856-180423-001-00 3. Slide USB-DOM holder to back side. At the same time, lock holder's hook and insert holder's projection part into a slit in the drawer bottom of server module. There is each part to fix a USB-DOM holder on server module at the following place. Note Projection part Hook...
Page 21
856-180423-001-00 ①Insert the hook's projection part of holder in the hole at the side of HDD bracket. Tips [ The side part of a HDD bracket ] ※The state that holder's hook locked normally - 21 -...
Page 22
856-180423-001-00 ②Slide USB-DOM holder to the back, at the same time, insert holder's projection part Tips into a slit in the drawer bottom of server module. [ The place of slit in the drawer bottom of server module ] ( Enlarged drawing ) ※The state that holder's projection part inserted into a slit normally.
Page 23
856-180423-001-00 USB extend cable. See the figures below for how to connect ■ Route of the VMware ESXi support kit’s cable 【Left server module】 Pass the cable under the cooling sponge. Cable tie Cable tie Cable tie USB-DOM 【Right server module】 Pass the cable under the cooling sponge.
Page 24
856-180423-001-00 Pass the USB extend cable under the other cables at Cable tie part. Important (It's to prevent a cable sticking out. ) Fold the excess length of cable on the motherboard. Important The excess length of cable 5. Additionally when there is a part removed for installing an internal optional device, please return it to the original location.
Page 25
856-180423-001-00 3.OS Install VMware ESXi installation to this system is done by the install media (NEC Custom Image). Notes ・This product does not include ESXi license. Please prepare the licenses(required quantity) for installed ESXi edition. ・Do not mix the HDD that can boot other OS.
Page 26
856-180423-001-00 - M e m o - N8106-010 VMware ESXi support kit User’s Guide * 856-180423-001-00 * - 26 -...