Panasonic NAVI smart Quick Reference page 12

„ Setting tools in the ribbon
Item
1 Open
2 I/O monitor
3 Refresh screen
„ Control tools in the ribbon
Item
1 Start marking
2 Lock
3 Connection
4 Operation
5 Laser pumping
6 "Stop laser" button
12
1 2
Description
You can select and open a marking file on the "Monitor" screen.
The status ("ON"/"OFF") of the I/O terminals on the laser marking system is displayed.
This button is available in the ribbon, if you select "Button "Refresh screen"" in "Startup"
> "Preferences" > "Screen refresh setting" > "Method".
Use the "Refresh screen" button to manually update the "Monitor" screen.
1 2 3
Description
In RUN mode, you can use this button to trigger the laser radiation manually.
Use this tool to unlock or lock the "Start marking" button.
Use this tool to establish or disconnect an online connection between the laser marking
system and a PC.
Use this tool to switch the laser marking system operation to remote or RUN mode.
Turns laser pumping on or off.
Terminates the laser radiation or disable the laser radiation temporarily.
ME-NAVIS2-QR-1
3
4 5 6